Outer Limits 4x4 Board

Would it have a idle bypass circuit?

Auto choke. Sounds right.

I'm going through heaps of fuel now due to this idle issue... Grrrrrrr

The stall when hot only happends when I turn the cold idle down to stop it cold idling at 2000.

Does anyone think the issue could be faulty advance mech in the dizzy? Does this happen to Zooks?

Carby.

If the idle is adjusted it stalls when hot.

It the timing different between hot and cold?

What controls cold idle?

I can't figure this out. When it starts in the morning, idle is fine at 1ooorpm. After a brief drive it will idle at 2000. Further driving may see the idle drop to 1500. Even after 60 mins! In the afternoon it doesn't do it. In the morning it will run on, and I have pop a gear to get the motor to ...

Same as mine...







not.

First thing I did to mine was 15x7 sunny with 30x9 tyres.

No rub and great for on and off road. They are all terrains.

I later put 30mm in the body to help with clearance.

After reading this thread on Friday, I went to Clark Rubber on Saturday.

By Saturday arvo my Vit looked like this.





Flares cost me under $50. I neeed more screws though.

I ran 30" without any lift, no rubbing at all.

I then went 30mm body because I was bored.

I'm fitting one to mine.

I can't wait.

Estimate psi is 5 and I hope to make 80rwkw.

I have 30" on my SWB and NO lift and no rubbing..

( I have added lift now though )

OK, I would know, it's my brother with the hilux.

Sorry if it's a simple question, I know SFA about Toyotas.

Will an exhaust manifold from a 2.8D fit a 2.7efi?

Cheers

Umm, I'mm pretty sure it is illegal.

A: fumes.
B: backfire = interior fire.

I'd like to see some before and after pix of both suspension and body lifts.

What is the cost? I wouldn't mide a slightly wider one in the vit.

The stick one was fine until now....

It there a better alternative than the factory one?

I am fitting a turbo in the next month or so also.

I'd like something that is easy to fit, easy to get, easy to set up (not asking for much )

Cheers.

I fitted F100 wheels to mine,

You can have a pair of the stock wheels if you want them

Where are you? CVE Performance is doing a Turbo on LTDHO's (from this board) Vitara. They are more that capable of doing the EFI or turbo on yours, they are in VIC. www.cveperformance.com Very true. The motor has been rebuilt and decomp'ed. Goes better already. Once it's run in (another 500klms ...

Is it that same at the carby motors?

Dan, I just rebuilt mine for $1700! Same as what i paid for the car!!

Goes like a dream now

I just had the 8v reco'd instead.
new motor is in

My motor is out and the head is stuffed.

Can I fit a 16v in the place as the old 8v?
Will the inlet and exhaust still bolt up?

Can this be confirmed? I want to do it right?

I have the above vehicle in SWB. Now from what I have read so far I can go a max of 1 inch on the studs without getting special nuts made. I need 8 spacers. Now, is the 1" ontop of the rubber mount or including? Is 8 all I need? The front two are bolts, will I need longer ones. All studs are 8mm and ...

I went from 26 to 30 with my Vit. Acceleration has dropped off heaps but effieciency is great. I'm just going to put up with itm, as it is only the fisrt few seconds that are effected, once you rev out first and hit 2nd the Vit will be moving. Also don't forget, if ya haven't changed ya speedo gear ...

Thanks for the info.

The Vit should run alot smoother when I am finished.

The 1990 Carb Vit is coming up to 200,000 and I want to replace all fluids. I have done a search and couldn't find the amounts. Can someone tell me the amount and type of oil needed for: Front diff Rear diff Trans case Gear box (Obviously I will be doing engine and other servicable items) If it ...

This is the grill I damaged


This is the grill I wanna get. Sometimes the centre part is black.

But the two I'm talking about are different in looks though, yeah?

The later grill has a blach middle section, right?

I just distroyed my grill. :(

My question is, will the grill of a 1995 Vitara fit a 1990 model?