Outer Limits 4x4 Board

The noise is (now very) intermittent, only occurs under load / boost occasionally..
It sounds like a dry bearing squeal of death (turbo seems fine)..
have been told that an air leak from turbo outlet can sound similar..
could have been belt slip too, but that seems fine..
I would have thought an ...

Hi there landie people.
Anyone know what boost pressure the TD5 runs as standard?

I'm looking for a mysterious noise/leak from turbo area? :?
- and I am going to fit boost gauge to check pressure, except I don't know what it should be at...

and also where is the best place for a pyrometer gauge ...

Just maybe bad timing/karma,
but you may just have a faulty ABS pump relay, or fuse.

Had a faulty relay in my Defender Extreme once, where ABS and TC lights stayed on.
Took LR service a while to figure it out, and relay is priced accordingly!

Can you hear the ABS pump pressurize when you first ...

Hi all,
A liitle help please,
I've got a 99 Defender 110 'Extreme' (abs fitted),
need to know what type of diffs it has (ie style or maker)

Front Diff
http://i80.photobucket.com/albums/j168/SandToyZ_2006/99Defender_Frontdiff.jpg

Rear Diff
http://i80.photobucket.com/albums/j168/SandToyZ_2006 ...

Your pictures don't work because I think you are trying to get them from the members area of ALRO site, which is not available to share?

Quote from site when copied image link...

"Hi you were trying to reach /albums/Dave-Mates-Modified-Landy-s/100_0251Mod.sized.jpg it is unavailable or non ...

As my arms flailed around the cabin, I found that if I pulled on
the highbeam "flasher" there was light. (no damage except for
a new pair of pants).

ttfn
Matthew

Yep, first time it happened to us, was dark, no moon, roo's, trees.
Did say 'WTF' very loudly, then did the high beam flasher ...

Just had my Defender headlight switch fail on the way home the other nite.
Lucky it was not fully dark at the time, as all lights go out!!! - done that once before in the total dark & roo country :shock:

The plastic base that the metal contacts are riveted through goes soft, allowing the contact ...

Long Live BullBars, and Modified 4wds :twisted:

and just some more dribble from the anti 4x4 brigade... :roll:
check this out
http://perth.indymedia.org/?action=newswire&parentview=12854

The post at the end - " I agree! by Pauldo " is so typical,
"The good cure for whenever they lumber behind you ...

If it's track vehicles yer after...

Try one of these,
pics - http://www.howeandhowe.com/ripsaw.htm

video - http://www.howeandhowe.com/videos.htm

and maybe upgraded with that turboed 540cube monster motor
elsewhere on the forum!!!

...now that should suit me fine

Question, The -25mm offset is measured from the inside bead of rim to where rim bolts to rotors (correct?)


No. You are talking about backspace. Offset is measured from the centreline of the wheel to the mounting face of the wheel. Negative offset means the mounting face is inboard (vehicle side ...

I'd be interested in 6 of 16x8 black rims.

Question, The -25mm offset is measured from the inside bead of rim to where rim bolts to rotors (correct?)

I will be in Melbourne early Feb.
Have friend who can pick the up too.

Looking at going to 35" tyres for my '99 Defender Extreme.