Outer Limits 4x4 Board

for my bike, anyone know where i can get one or how to make one? cheers guys

cheers for that Gary i owe yah
cheers Harv

in a nut shell, 3 slave cylinders and 2 master cylinders later, all brand new and there not farkin working! its driving further round the bend than the damn 4wd i thought maybe a leak where the line goes onto the slave cylinder so i replaced both the small copper washers, and yet STILL its leaking ...

thanks a million fellas!

now to find an ignition cause after 5 hours ill be farked if i can find the damn keys!

just quickly!

which is the best auto trans fluid for my FZJ105 auto?

just put in a new radiator and lost some fluid!

cheers in advance guys

damn...bought new lift for my cruiser and the bolt on the bottom wont bite because of the rubbers and im not sure about these left over washers! can some one please post a pick of how the top and bottom setup is suppose to look ? on the top ive got the shock, a cup washer, rubber, cup washer, plate ...

ok got myself a set of 5 of these from bunnings for $49 and if i knew how good theses are and they were $100, id still get them! did the job of gettin the bolt out easy as! job done and again thanks 80,S :armsup: :armsup: :armsup: thought the same the first time I used mine. Good bit of gear ...

ok got myself a set of 5 of these from bunnings for $49 and if i knew how good theses are and they were $100, id still get them!

did the job of gettin the bolt out easy as!

job done and again thanks 80,S

I have a set of these things http://www.irwin.com/uploads/products/large/bolt-extractors-802.jpg http://www.irwin.com/tools/screw-bolt-extractors/bolt-extractors if there is reasonable access and a bit of space around the bolt head (the bolt extractor is bigger than a socket), they work great. I ...

damn im realy pithed off now! trying to change the oil pump seal on the cruiser so close yet so far ive got all the belts stripped and made a tool to hold the harmonic balancer while i crack the crank bolt all good and then the last bolt which is on the pulley on the oil pump cover WHEN grrrrrrrrr ...

just quickly! are these any good for a 12 000p warn winch? or am i better off buying 4 new of the older type? or maybe is there a better one than this? http://www.ebay.com.au/itm/New-Winch-12-Volt-Solenoid-Switch-Control-Up-16800LB-/160506836712?pt=AU_Car_Parts_Accessories&hash=item255ef3f6e8 ...

so what your sayin (excuse my Toyota noobyness) is that these are a very good c.v? and do they have them for my 105 series?
cheers Harv

any one good in Sydney s/w who doesnt charge an arm and a leg or some one wanna make some cash?
needs a super clean carpet jobby (dirt and mud) and a detail
cheers

i just picked up a 98 with 170,000 for only $13,700 on gas in very nice nic so id say nah, not a hope in hell when i seen 80s with less k,s for even less than that on gas!

ok my mates auto has gone in his gq and the thing is slippin like a biatch!

is it stuffed throw it away?
try and put a kit in it (i.e filter gaskets etc)?
or is there a definate has to go for a full rebuild?

cheers in advance

ok guys done a search and no good!

sorry if this is a stupid question but are the GQ rear lower control arms the same as say the 80 series ones?

cheers in advance Harv

_Mitcho_ wrote:im running a 4" dobinsons lift and i run 38.5' boggers and it only rubs alittle bit on the front im very happy with it!

ive got a set of 4" Dobinsons coils and shocks for an 80 series if yah know anyone who wants to buy em?

ok these are 4" dobinsons springs and shocks so im guessing it would give a 6 inch

he wants both springs and shocks and the shocks wont fit anyways so back on the market they go

ok cool thanks heaps mate!
cheers

just wondering if any one knows what would be the best way to polish stainless steel at home?

gotta do all the external bits for my 69 XT wagon

cheers in advance

hey guys

ive got a bloke whos interested in the 80 series shocks and coils i have for sale but wants them for a GQ


will they fit?

cheers in advance

thank you for all the replies guys! took note of all that was posted..................... and decided to buy a grinder and a wire brush and do it with that intead! came up prety good and im trying not to fart cause i know its gonna be dusty! carp every where but it did a good job and now ready to ...

any one done this?
whats your setup?

ive been trying to get the paint off an outboard and its gettin messy

cheers in advance

im guessing that by the first post YES hes runnin winch of his second battery!

big no no and will kill his next one if thats the case! but without answering questions from others, how the hell can he be helped?

ok yesterday we had to park the boat and trailer up and leave the fridge at the picnic area and not bad for a while but yes kids open and shut the fridge without even gettin shit out and didnt last cold for long! so yes now im on the hunt for the best way besides a small genni (cause they expensive ...

rockcrawler31 wrote:Cool familybus. I'm guessing that if they don't have the right ones there then at least i can get close and have the appropriate ones made up.

MILO

bingo!

SYDNEY

Dobinsons Sydney Branch
Unit 1/6 Orielton Drive
Smeaton Grange
New South Wales 2567 Australia

Ph: (02) 4647 8295

ask for Martin, top bloke knows his stuff

better off with this one in electrical maybe dude aswell!

Barno111 wrote:well its a 6.6 db gain! trying to get the best inbetween ariel. But yer once i got it, the size of it was just too big!

bigger doesnt mean better when it comes to arials and simply no you cant cut the one you have!

VooDoo wrote:Why not just find a panel shop with an aligner? If they can straighten a chassis a bull bar is easy

because the tree cost nothin!

and it need a hug!