Outer Limits 4x4 Board

lets keep it simple .use your standard bends out of the carbi then 3" hose join to a T pice made out of 3" exhaust pipe .the botom leg of the T runs to the front of the car between the carbies then with some 3" flex you run up to a standard EFI air filter then in to your snorkle.
Hope this helps ,I ...

one more question

i have cut guards front and rear (~50mm each) will this be a problem ?

as the Lang's from guard to guard is shorter than on a standard 2 door

Just wondering wether Ruff or strange rover could post a pick of this product?


cheers

steve

These are on a disco but they are the same as a range rover.

are there fitted to the c/h rails at all?

or just to the body?



No fitting to the chassis rails, there is no need, they are attached ...

RUFF wrote:

BIg StEvE wrote:Just wondering wether Ruff or strange rover could post a pick of this product?


cheers

steve

These are on a disco but they are the same as a range rover.

are there fitted to the c/h rails at all?

or just to the body?

Ralf the RR wrote:I just bought some "crystal" lenses with super white 90/100 globes off ebay ($86 delivered).
These will replace my LH sealed beam & RH H4 - both crap.

let me know how they perform and if u happy with the result

Take them to your local nut and bold place and the can help you

You want 40 amp relays and 30 amp fuses for each lamp and if you use 6 mm2 wire all the way to the globe plug (get new one ) and it will mack a huge difference even withe the standard globes but if u want get the 65/100 w once and it will be better

tacks about 2-3 hrs to do

if u can fit the ...

i have 890 in the front and 900 at the back

4" between bump stops in the front and 5" at the back

i wonder if you can get some 303 x 85 x R24 MTR to go on to the rims and a nice 2" body lift and a 2" spring lift and then put "BLACK BETTY"on the sterio and of you go go go go go go

Hi

i used the boss from the original wheel (cut it all off ) and had my toolmaker machine me up an adaptor plate. Welding the 2 together and fitted the $59.95 special wheel on to it with 6 bolds.
then put a spacer in between the new boss and the wheel to space it away from the controls by about 40 ...

Hi

get your self an A133/90 ea 90amp from a late 80 rr

call ROVACENTRE in Sky on 97822630 ask for Dave

i just fitted on to my 79 RR just needs a new bracket for the belt tensioner


Kai

You may need a new seal & diaphragm Kit for your converter.
I change mein every 60000 to 70000 k


Also try to fill it up with 100% propane mutch better for your engine

See http://www.supergas.com.au


kai

You may need a new seal & diaphragm Kit for your converter.
I change it every 60000 to 70000 k


Also try to fill it up with 100% propane mutch better for your engine

See http://www.supergas.com.au


kai

HI TO ALL

WHAT IS THE BEST WAY TO WATER PROOF MY PETROL V8 MOTOR ELECTRIC’S (EA DISTRIBUTOR SPARKPLUGS) FOR WATER CROSSINGS

KAI