Outer Limits 4x4 Board

You got me! the old cut and paste

http://www.nq4wdexpo.com.au/images/index_10.jpg
http://www.nq4wdexpo.com.au/nq%204wd%20expo%20DL.pdf

people this will be one of the biggest, if not the biggest 4wd and camping expo ever to hit the NTH QLD region!

Over 10000 people are expected to attend the North Queensland 4wd and Camping ...

So does any one have pic's yet

XLGXL do you notice the benefits right through rev range?

I have notice that the turbo cuts in a lot earlier and continues through the rev range

I take it from this you went with glycol? did you use it straight up or mix with water? and . . . .

100% and thats why it is harder to bleed the ...

I have a denco water to air kit (self fitted) on my 1hdt and I will give you MY opion
Clause .1
I am the worst backyard mechanic in Oz if it will go wrong for me it will

Problems
1. they do not make a kit for the 1hdt only for the 1hz the turbos are on different angles. Denco know about this and ...

I think they are going to be there on the last weekend

Heard nurse MUSS was going to handle the concrete pills for this one. So be on your best behaviour. The bitch session official judicator for the happy pills vote one MUSS!!!!!!!!!!!

Dave hook him up. Festa you are as good as married so leave him alone

This weekend guys come and say hello to the crew we are going to have two comp cars on display. No track this year maybe next year

So any updates???

Ok tufenuf were did you steal the computer from. oh yeah well done 6th not bad and you haven't even got hydro steer

You don't need to exchange the whole diff.
Ok check these out

http://forum.ih8mud.com/showthread.php?t=137225&highlight=front+disc+brake+dummies

And for powersteering these might help

http://web.mac.com/troyraven/iWeb/Project%20V8-FJ40/Power%20Steering%20/2825EAA0-8962-4D24-A253-6682D3535D61 ...

So sheety wasn't festers navi then?

Ok so is there an update for those of us who could not make this year???????

Now is the time to convert to powersteering just get a 60 series box and some other parts (there is a write up somewhere on how to do this) and convert you will never go back

Ok put a bit of weight behind it. Some how I don't think get the small sledge hammer out and whack the :bad-words: out of it. And thats exactly what I did now rendering the car :bad-words:.
sometimes I get frustrated in doing so destroying things make me feel better well at least while I am ...

Yeah thought of that but it states in the Gregorys that to loosen the shoes to turn the wheel down it doesn't mention on one side only?

Thanks Bluey for your help.I was in the process of replacing the handbrake cable the old one has been over used so I can rule that one out.
Trying to turn the adjuster wheel down to lossen the handbrake shoes as descibed in the Gregorys Toyota handbook so I can rule that one out
going to have some ...

Still no luck releasing the brake shoes I have tried a bit of force but I think it might be starting to damage the wheel I can't see any other way the having to rotate that small wheel so I can get the disc rotor off

I can't even drive it to a workshop to get it fix

Have tried to adjust my 80 series hande brake (Big mistake) got to the part to wind the wheel up till the brake shoes grip the rotor then I goto wind the wheel back 8 clicks nothing.
Problem is I can not wind it back off at all. Now the hand brake is stuck on, I can not move the brake rotor at all ...

Ok so I spoke to Denco and was informed that the pipe does need a bit of bending to fit. It is easier to use the OEM rubber hose then the one supplied from Denco you will also need better clamps to hold the hoses on, the clamps supplied are of not good quality. I was informed that when the kits were ...

Ok so it is on I use the oringanl hose that went from the turbo to the original inlet pipe which gave me a bit of flexability as for bleeding the system not as easy as I thought the pump moves the water very slowly. If you are at the front of the car it goes in a anticlockwise diretion (I think ...

Thanks BC That does make alot of sense as you were spot on with the shape. After looking at the break down of the turbo I have relized the big task for the little job is way overboarded so I will probaly go with the option of a flex hose from the turbo outlet to the bottom of the pipe that came with ...

Sorry about that I have a 1994 factory turbo 1hdt rang denco to discuss putting an intercooler on because i was confuse myself as they don't do a 1hdt intercooler but I was told that the 1hz will fit on the 1hdt no problems

Wel with the kit just about on barrel in and then you go to place the pipe ...

Just bought a water to air intercooler for my 1HDT spoke to denco and they said that the 1HZ fits my model 94 factory turbo. All is fine until I go to fit the barrel, the join between the outlet of the turbo to the inlet of the cast pipe (sought of shape like an S) supply in the kit that goes upto ...

Just a reminder that the Expo is on next weekend so come along and say hello. we will have the Club on display with a Comp car and a family tourer just to show that we cater for all kinds of off-.road enthusiasts

Ok I have found this and might be of interest to you Muss

Yep thats right it was a dodgy earth

Don't let Toyota get away with it if they broke it they should fix problem solve my 2c. anyway go to the lcool site and it explains it mine opion again leave it of and just use the CDL button to activate it.

Ok the Black river 4WD club is coming down with a few cars competing (depends on the carnage of the OBC) and the rest will be supporting or giving a helping hand if Dave needs it. So will hope to see you all there.

Hey I just had mine give out last week took it to Toyota and got hit in the head with a big fat TUNA :oops: . The total cost was $1200 of my hard earn cash. and get this, made them itemised the bill they charged me wait for it


$1.10 for a BL :bad-words: :bad-words: DY 10 amp fuse :twisted: I had ...