Outer Limits 4x4 Board

LRA lillydale very good, i have their tank to suit body lift with the 3mm bottom instead of the 2mm. They installed it and did the sender. Have had two Brown Davis before that, never ever again will i get one of there tanks.

Cut two pices of 30x30 x about 250 RHS and bolt it between the carrier and back door to space it out. just need longer bolts.

oil will most likley be coming from the rocker cover breather which will be connected to the intake side of the turbo somewhere, or into the air cleaner. oil will be coming from engine bypass not the turbo.

i have smithies arms, very good, he can make them to any custom length that you want.

had similar problems to u, replaced everything with genuine bushes and still had problems, but no so bad. Found problem to be the steering dampner- not the dampner its self but it was a pin to pin type,as nissans have. the rubber around the pin has enough compression to allow the wheels to "wobble ...

[quote="DieselBoy"]Umm, the dissconnect kit is one for the front and one for the rear.
You only need to dissconnect one end each bar, and it renders both sway bars inopperable.
Dissconnecting both ends is totally unessessary.
My Factory dissconnect unlocks one end of the rear.
It came from the ...

[quote="chrispy"][quote="crankycruiser"]just disconnect one side.. will still work alright[/quote]

I use ocky's... but your idea sounds worthy of testing![/quote]

i have extended links/disconnects( 100-150 mm longer) but if i leave one side connected it completely stuffes the bushes on both the ...

[quote="bru21"]use duct tape. just make sure on the front you fold it the correct way or i chews out you tyres - i know from experiance with a near new radial claw and mate that helped, and i didn't explain / check [/quote]

Thanks guys,ill give the duct tape/occy strap ideas a go.

Have installed snake racing swaybar disconnects - when the bar is disconnected it works its way down, so the two disconnected ends are hanging below the trailing arms( so it will get caught on anything!!! ). Spoke to snake & they said that the "d" bushes must be too worn. NOT HAPPY with that (OR ...