Outer Limits 4x4 Board

shot, cheers dude

and a pre paint and stickers picture after mods

http://farm2.static.flickr.com/1281/333 ... 3c.jpg?v=0

cant get the pic to show, not sure what im doing wrong? tried to wrap it with the [img] etc but no go... ahh well

cheers for the info. sold 60's longs and bought 80 series longs and so far the hi pin diff has taken the abuse fine :armsup: pity i blew the rear carrier pin to bits half way thru a winch challenge :oops: too much foot while bouncing, had a lockright in the rear which is the cause of breakage due to ...

im after some information on axle lengths and the difference between 60 series and 80 series i know the 80 series is a wider unit but a lot of that is in the hub so im wondering if my 30spline 60 series longfields and cv's will fit into the 80 series housing? also will the 80 series hi pin diff take ...

pics total view http://farm4.static.flickr.com/3072/2928032306_5d28a333a3.jpg?v=0 winch mounted higher http://farm4.static.flickr.com/3224/2928028162_822f69d107.jpg?v=0 corner over wrap covering flare http://farm4.static.flickr.com/3241/2927173723_8ef80db20d.jpg?v=0 pretty happy with the outcome ...

the bar is fitted and i would say its better than the 80 series bar !, fair bit of messing around with mounting but the bar itself is better, has more side protection as the sides come right up and over the bottom of the flares for protection. looks good to. will post a pic or two when i find my ...

the way i figure it theres nothing a grinder and a welder cant fix, so i bought the bar and mounting hardware,has cost me about half the price of a new one and after i modify the mounts it will be primo, the 100 series has a much wider chassis so all i have to do is mod the mounting plates by ...

hi guys, i have an 80 series cruiser,95 VX manual etc etc etc ... wanting to put an ARB bull bar on it on a budget. have heard that a 100 series will fit with minor bracket modifications? have found a well looked after second hand 100 series bar so keen to mod it on. just wondering what the main ...

I am looking to get rid of my holley and am looking and a rochester or gas. I have a 307 though :armsup: Best power fix ever well..... after a lot of heart ache and humming and harrring... i replaced the old standard 2f carb :cool: for a 600 holley and 350 chev :armsup: so cool.... should have done ...

hey all, just to add to this thread :cool: my father has a 91 VX 4.2td ltd and im talking to him about doing this conversion as he is wanting to put a locker in the front. a: will the part time kit fit into these trucks the same as a normal 80 ? b: is it just a case of poping the tail off the ...

cheers dude,

i think tobie may have one sorted for me if its the right one. hopefully it will be as im itching to get out for a play in the mud, but not game to go without the winch working,,,,thats just asking for trouble.

cheers Jimbo, PM sent

jimbo jones wrote:PM dor50r he has one for sale

cant seem to find his user name on the list mate

anyone have or know where i can get a cruiser PTO to fit my 4spd split case transfer ?

just done the upgrade on my 40 and found that NO my old 3spd transfer pto doesnt fit !

so i NEEED a PTO

any help appreciated

cheers dave

mines the early model 1970 so will have to re drill i guess...

cool, so they are all the same size ( 9" ) as the 40 diff just have different Drive shaft to pinion flange bolt spacings... ? ?

easy question for you guys who know...

what other model cruiser diffs will fit into the rear of my FJ40 ? 30 spline 4.1 ratio ?

60 series ?
70 series ?
80 series ?

or do i have to use a 40 ???

cheers

ok, i have a 40 :D iits the freekin best machine in the world :armsup: i have run it in standard 2F trim for 6000years :cool: cos its that old :? AND I JUST CANT KILL IT NO MATTER HOW HARD I TRY ! i now want to bolt a 2 barrel holley on it as i have heard this is one of the most popular and best mod ...

excuse my ignorance but... what breaks?.... :?: i have turned the steering link rod into a banana from a stooopid winching manuver(totally stoopid and i should have known better)pulled the rod off,bent it back into shape,mostly straight, and the double arm is still fine so...not loose,bent,twisted ...

:armsup: hi steer arm the cheep way :armsup: on my 40 when i did the disk conversion i re did the steering and added powersteer as well, to aid this i did my hi steer arm with a few ideas from the net and from guys here in NZ. bolted another arm on top of the existing one,with a slight bend in it to ...

crapper, yea was just working out rotation after reversal

and the 80series has a smaller diff crapper to that to

looks like i may be stuck with high angles on my front prop shaft for a while longer.... ahh well, least its strong as hell

hi guys, im wanting to know if a:can the front diff be turned over in the housing to make a high pinion(cheap)? b:has anybody done this? c:will a later(80'ish series with high pinion)high pinion diff head fit into my 40 series housing with the same axels? d:cost of a high pinion diff head? any info ...