Outer Limits 4x4 Board

the worst part would be changing the pedal box over , why do you want a manual? ive always been a manual man too but ive just spent all day climing rocks and up and down hill in an auto 61 and i dont think i could have done it with a manual just too much hard work changing gears all the time ,the ...

dont use 60 series in the front they wont fit . 75s are allready 50 mm longer than the 60 front,maybe put 60 rears up front ? could posibly do some custom 78-9 rears for the rear if you dont mind moving the mounts .

should be the same as putting gu centers in to a gq when i did mine all i had to do was change the rear pinion flange.

thats what i ment , the rest just look like cheap copies . i also like my procomp wheels 1059 i think.

if you are going to do 4w disks then go for 16" rims just gives that little bit extra room for calipers. the only good looking rims you have pictured there is the ones with the claws on them or the steelies . if your only going 15x8 make sure you get the max offset you can (-22 i think )just for ...

hey tom just make sure you dont forget some instructions for us with auto's ,also if you and chris need to test fit one to an auto let me know.

what issue was that in ?? ,if you want to see the pics better dunc i might have that book here .

its not a 60 but its got just as much over hang out the back. http://i3.photobucket.com/albums/y71/vn185iexec/p-lines%2030-8-09/SL371716.jpg http://i3.photobucket.com/albums/y71/vn185iexec/p-lines%2030-8-09/SL371718.jpg http://i3.photobucket.com/albums/y71/vn185iexec/p-lines%2030-8-09/SL371727.jpg

mine on 37"s

wont fit without moving spring perches 60 housing is wider +-3"

not sure on the bolt patterns ,ill get some pics for you

did mine differently http://www.outerlimits4x4.com/ftopic187782.php

i could make some brackets for you but not till mid january.

disks are fitted now just need to sort tailshaft hand brake.

anyone know what would be the minimum size for the disk to make it work properly ? was thinking bout 6-8" and using a small mechanical caliper off of a go-cart or something similar .

well after spending a few hours at the wrecking yard this morning ive come to the conclusion that i am going to use 80 hubs -75 disks and possibly calipers and make a bracket for the caliper ,should hopefully have it done in the next couple of nights. brendan what do you mean about machining the ...

im looking at swapping to rear disks on my 61 cruiser just wondering if any one has put pre 94 80'series rear disks on to a 60 series with drums and how they went about it , if it all bolts up easily ?? or at all . ive been told that 80s rear hubs will go on a 60 so i was just wondering if the whole ...

blk30y wrote:they are the same as tyres on the 60 above 37x14.50 creepy crawlers on eagle 15x12s with 2inch spacers

ok so chuck some pics of it up what suspension setup ,springs -shocks shackles??? what have you got ??do they rub?

as it sits now 2" 75's springs f+r extended anti inversoin shackles and 2"body lift. hope this helps .greg

ive got 3.5 spring lift +2" body and extended bumps they dont rub on road but offroad they still rub , the front not as bad but on the rear inner wheel tub and just on the mudflap . 1.5" spacers will fix the rear (for offroad only) and you will have to cut the front under the headlights to get any ...

has anyone used the speciality sizes 35,36,38x15x15 whats the difference between these and standard sizes ? i got quoted nearly 3k for 4x 38's a few weeks ago is this right ??

when you say disk conversion you mean the bracket to hold the caliper right ? and why the 75 studs ?

i wouldnt mind getting my 61 to brake better aswell ,scotty do you know excactly what parts are needed to put disks on the rear without having to do the trial and error thing or look for subaru calipers and all that crap caus i just dont have the time for that . ive read that 80's rear hubs fit on a ...

nice picture hulsty :armsup: looks familiar . this is tha rear shackle angle with 75'ssprings in a 60 http://i3.photobucket.com/albums/y71/vn185iexec/new%20sahara/SL370463.jpg the front hanger needs to be moved forwards 2" to keep the diff in the same spot, ive got measurements somwhere but cant ...

when i changed my centers in my old gq 2 years ago i paid $800 exchange for 4:6gu centers got em from brunswick deisels ,they change them out of the 2.8-3.0l and put in 4.1

My new fakes: http://img2.putfile.com/thumb/6/16303142191.jpg they look nice jet are they pro comp wheels ?how much were the fake rings im looking for some for mine at the moment but in perth theres nothing, has anybody got a set of these rings for sale or know of someone who has let me know

would like a straight answer ,can anyone tell me if hilux rear lines (from chassis to diff )are the same as a 60 cruiser ?? also are the front lines on the 60 the same as the rear ?? this place on ebay state that they are the same just want some solid evidence http://cgi.ebay.com.au/60cm-Long-Brake ...

Maybe flex it up a bit and see if the shackle hits the chassis rail. Can you measure from the centre of the hub to the bottom of the guard for me. I'm interested to know how much lift you got from those springs. mate im on the gold coast at the moment and wont be home till sunday so i will measure ...

ok so ive bought some parabolic springs 75s for the front which are fitted and look like they are going to work well ,also got some 75 rear parabolic springs too and fitted them but had to move the front hanger forwrds 2"to keep the diff in the same spot ,but what i need to know now is does my rear ...

well i cant be botherd stuffing around trying to fit 75's springs in my 60 so has anyone used EFS leaves their website says they give around 80mm of lift then i will get some 2" longer shackles (gotta fit 37"s somehow). also should i get 60's fronts or 75's fronts .im thinking 75's but dont want the ...

fitted the rears in on saturday (in the rear ) but had to remove them they pushed the diff back about 2"and the shackle angle was just past 45degrees (my shackles are 9"hole centres on the rear )i would of had to cut the front spring hanger off and move it forwards 2-3" to make it work .they also ...

putting in 75s rears in the rear tomoz will let you know how it went