Outer Limits 4x4 Board

Hi All, I see 4WD Systems sells a 90L aux tank, to replace the sub-tank. http://www.4wdsystems.com.au/html/tanks.htm I would love to hear from anyone that has fitted this tank - interested to find out about: - Clearance (i have ~3" suspension lift, and run 315/75 BFG MT's) - Installation (any issues ...

Hi, I've been trying to locate a tail light/turn signal cluster (fitted in LHS bumper) for my GU III, to no avail. I thought it would be a pretty common part, but none of the auto parts recyclers I've contacted have been able to help. I've contacted wreckers in Queensland, Victoria, ACT, etc. Does ...

will do, thanks!

Can anyone recommend a place in Canberra to do a reduction gear installation on a GU?

Thanks,
Jonty

I replaced the 10A hazard light fuse (under bonnet) for a 15A fuse, and it works

aaah, ok, that could well be it then, given I have additional indicators on bull bar and in the main light cluster in the rear. I'll have a look under the bonnet when i get a chance.

Thanks for the tip!

Hi, I just noticed my hazards/flashers are not working. I'm thinking it may have something to do with a towbar I had fitted recently. I have checked all the fuses, which seem to be ok. The indicators work fine. It's just the hazards which aren't working... any help would be appreciated. Thanks, Jonty

no worries, worked it out :-D

Hi,

does anyone know how to remove the lower dash panel, where the cigarette lighter is located?

Any help appreciated.

Thanks,
Jonty

I just greased up all the contact points...doesn't stop any of the movement, but irradicates the noise

Hiya, Just fitting one myself now. I like the idea of the magnetic catch. Have you go any pics of it in place? Cheers Hutch The magnetic catch is still sitting in my garage. I haven't had a chance to install it as yet...been busy on several other projects :) I will hopefully get round to fitting it ...

Yep, I guess it's going to be a call to the dept of transport. The reason for my enquiry was because I'm planning to install a 3rd lightforce 240 to my current pair on the bull bar, so the question surrounding even /odd numbers of lights also interests me. I also have 2 fog lights...would these ...

Hi,

Can anyone enlighten me (excuse the pun) as to the adr regulations for driving lights, i.e. how many forward facing lights are allowed? If additional lights are covered for onroad use, are they still illegal?

I have googled for this info, with no luck.

Thanks,
Jonty

My brother has recently bought an x-trail, so we were also looking to put a small lift in, primarily to fit some more aggressive AT's. I thought it would just be a matter of putting in longer springs and shocks...any info you manage to dig up would be appreciated.

cheers,
Jonty

Read this http://www.nohsc.gov.au/PDF/Statistics/report_jacks.pdf and you'll never crawl under anything again without 10 stands supporting. I understand the necessity for stands...i never siad that i would not use stands, just that i never had any. I have decided that i will remove the wheels, and ...

muddyperils, thanks for the tips. Much appreciated.

Sorry but you have a GU III 4.8 and you dont want to spend $150. You have no tools and you will probably put yourself in danger. Spend the money ;) I understand where you're coming from. $150 is not a great deal of money, but I prefer the satisfaction of doing these things myself. I have done ...

oh yeah...another thing...

i was hoping that i could just compress the spring enough to slip the spacer in ontop of the coil, but there is that big ass bump stop in the way ... i gather that means that i need to remove the spring completely??

After hiring all this stuff it would probably be cheaper to have them fitted about $55 You could be right, but so far i haven't found anywhere that will do it for that price. I was quoted around $150 mark...anyone know of a cheaper place in melb?? If i do end up doing it myself, seems it may be ...

Thanks Rob,

I don't have chassis stands, guess i could hire that as well?!

I was even contemplating the idea of getting someone with a forklift to help out...maybe this would be easier...hmmm

Cheers,
Jonty

Hi all, I am going to be installing a set of 30mm coil spacers in my GU sometime this week. I am somewhat "mechanically disadvantaged", but I think it should be an easy enough job for me to do myself. I was hoping someone could give me some tips as to the best way to do this. I was planning to ...

I'm driving a 4.8 Auto (as the sig says), with 35's, and 3.9 ratios (instead of the standard 3.5's) I still find that the engine breaking is really bad, and it runs away from me down steep hills. I was considering installing the 83% reduction gears, but it seems that the 44% may be better suited to ...

How's it look installed ? Keen on one myself but that ugly arsed hinge and caps make me bork a little :( I just installed this kit last weekend. Was really easy, took less than an hour. It's a really simple kit, but at least they have taken all the guess work out. Also, they no longer use the gold ...

Hi, I have read a number of the threads on this topic, and it seems both Rockhopper and Gearmaster are highly regarded, with not much to seperate them...let me know if i'm wrong... I am looking for advice on where the best place is to have either of these fitted in Melbourne, considering both price ...

ok, installed the lights. Everything is working nicely, and it makes a big difference...feel like the car is "complete" now :) Dan, your tips came in handy...thanks. I had an issue, i found the light assembly filled up with dust, from filing out the the holes. I decided to try and flush the dust out ...

Thanks Dan...greatly appreciated!

looks like i'm in for a busy weekend...also hoping to fit the aftermarket glovebox in the passenger "airbag" compartment...

Nope, haven't started yet. Will hopefully do it over the weekend. Thanks for those tips. will make my job much easier! Thanks for the comments re: car...i really like the factory alloys, but had to replace them, to get cruiser offset, so that i could fit the 315's. I know some will turn their noses ...

even better

thanks for that guys

gu4800, i'm interested to know what parts you used. I had trouble finding wedge globe holders at a reasonable price, so I have settled for Narva bayonet globes and holders (Total cost was $14 ).

Stupid question...

I'm wiring up the dummy lights in my GU, and was wondering which filament, in the dual filament (21/5W) globe should be used for stop, and which for tail. I'm guessing 21W filament is for stop, and 5W filament wired to tail light...

TIA
Jonty