Outer Limits 4x4 Board

Ahh, looks like the all those coilys out there are finally coming out of the wood work! Might see a growing trend for (more) aftermarket parts...yay! There is much talk of poly bushes being rubbish, and as my originals are farked, a new set is in order. So, with all these opinions that poly is pox ...

mud4b wrote:....
the rear lsd from a jimny goes strait into the rear of a coily....
thanks mark.

Howdy!
Its the LSD an easy swap? Anyone done it? how would you rate it? obviously a locker or welded would be best, but to keep things sensible is this a good option?
Anyone wrecking a jimny??

Cheers

Sorry for the Hi-jack!

I have a 1ltr case sitting waiting to find a home in the coily...anyone done this swap or know of any write ups? Can driveshafts be swapped with earlier models etc to address the legth issues?

Cheers
rob

Hi Guys,

Further To cohunas plea for a coily axle, can anyone tell me (ASAP) if Jimny axles will fit a coily?

Many thanks

Rob

Cheers Fellas! The head is still in place, so may well just be the gasket! ya never know!! Looks like a few options and paths to take, my cousin worked at Orgers for years, he will be the one to have a look at it and tell us what the story is and go from there! Unfortunately I dont have the time to ...

Howdy! Im chasing some replacement rails so a can fit my comfy sport seats and give my bodgy back a rest! What i would like to know is if the coily rails (see below for mounting positions) are the same as earlier ones (pretty sure early 1ltrs are different) or not? I am desperately seaking some ...

Excellent advice kids! Many thanks!
i might give halls a hoy, they're just up the road!

I think she is keen to use this as an excuse to upgrade, otherwise $900 for a reco sounds alright!

thanks again, fingers crossed!

rob

Howdy Folks, My mums patrol has been worked hard over the years and has decided to crack it head! Her mechanic aid that this is a common thing, id like to know if that is the case? I was under the impression that these engines are tough as guts!!?? Its a 1990 4.2 (carby) on gas (probably the culprit ...

I have some bling seats :cool: to put in the zook, but the Coily rails/sliders require some massaging to suit, Im not keen on doing this (like to be able to reinstall originals) so I am wondering if earlier rails are the same/similiar to coily ones? Anyone have any pics and/or measurements of 'em ...

Good stuff!!!
What did you do for the shocks?

Nice to see proper safety gear being used too!!!

Cheers
Rob

Cumfy in a zoook...bwaaahahahaha Sorry Just so you have an example of a zook with coils...Heres mine - custom coily with coil springs! 2-3 inch body lift, 2-3 inch sus lift (yes it is sus!!) these 32' mongrels fit nicely.... Ride is shite! http://i88.photobucket.com/albums/k170/nixon10/22-12-06_1842 ...

Thanks, Jas; Yup, used the old pressure plate! Could be it!!! Out it comes!! Mud; Splines look the same, and accepted the different plates, maybe diff length or something? Both are 20 tooth splines...may have come out a n NT too........NFI Will probably replace the lot with a heavy duty job, was ...

I mean, clutch or gear box..... Crazy noises coming from below, and no drive...in the zook :roll: .....pull out gearbox, and out falls two peices of clutch (plate?)!!! Not good!!! Had another box still attached to different engine, so pulled it apart to loot the clutch, fitted it..no noise....but ...

some sweet work there! Looking good!

This site may be of interest....

http://go.jeep-xj.info/HowtoARBrear.htm

keep it up!

Not sure what has caused it, bit it is only one of the oil journals (sp?) that has stopped delivering the black stuff - the rest of the cam is/was well lubed! So i am reasonably confident that its just a clogged journal in the head, I'll be surprised and less than impressed if theres issues down ...

sure did! dry as a bone up there!! that'll do it!!

Howdy, anyone know of any coily grills about? any condition? http://carl.outerlimits4x4.com/viewtopic.php?t=91763 Also, 1st run in car after 1.6 16v TBI conversion....Cracked cam..snapped the F%$#@#er clean in 1/2. Ace..new head :x ANyone else had this happen? I'll be puttin a Vit head on it (MPI ...

As its says, After a 1.6 (MPI) Vitara head - what are they worth....anyone fitted one to a TBI bottom end (need to block off the injector holes ect)? Anyone got one?

Cheers
rob

Greetings Folks,

please refer to here regarding my sierra ('96) gauge woes!!


http://www.outerlimits4x4.com/viewtopic.php?t=90866


Thanks in advance

Hokay, Oil light sorted! Can anyone tell me what the wires that go into the Temp and fuel gauge do? Theres 3 in each, and 2 of these are common, whilst the 3rd (on each gauge) head off to the respective sender. Also, what is the Taco set-up on the coily? Constant positive and a pulse from the neg on ...

Cheers lads,

Muppet - Nah, only got 1/4 of a tank init - it sitting well and truely over the full line!!

Duki, good call, didn't think of that, i think the previous owner was running a thermo, shall have a bit more of a hunt for that!

Thanks

Greetings Folks, Well she's finally running (G16 16v TBI conversion)!!!!! http://carl.outerlimits4x4.com/viewtopic.php?t=77174&highlight= . :armsup: Woohooooooo!! :armsup: But before i go racing around the streets....and hills, theres the matter of a few things not behaving in the dash! These are ...

Lucky bastard!! Where's it at (location)??

"I'll have to check. I assume so as it's been running already"

Thats what i was told about mine!!!

If its there, could you possible measure its resistance?

Cheers, keep us posted!

Damo... dont do it ...take it back!!!! hahahaha These we're a bastard to find.....hope it helps! Did you get the Injector Resistor with the donk? http://i88.photobucket.com/albums/k170/nixon10/TBIWiring1.jpg http://i88.photobucket.com/albums/k170/nixon10/TBIWiring2.jpg Sorry about the oil splatter ...

:lol: nahh, for once its not something from the sunny place!!! I have no knowledge of this engine, so whether or not the bottom end OR any of it is any good is a bit too much of a gamble. i had thought ive sorting out the head gasket and floggin it off, but i really aint got the time or room do to ...

Cheers...about what i was thinking!!! I know of one, the guys wants $150 for it, i said if thats with loom computer,injector, starter,alt etc ect, then Im keen...he said, nah just the donk!!! plus a 3hour drive to get to it and then id have to remove it!!! So thats a nevermind from me!!!! thanks ...

Hey Guys,
Just wondering what you guys thing a 1.6 (I think 16valve) with a blow head gasket is worth...no injection or other goodies with it?
(and no, its not the one ive just installed!!!)

Cheers

Confirmed - Yup, unscrews the valve core and pppssshhhhhoooot!!!Quick as a flash!!!! from 30 - 10 psi in about 8 seconds....on my first go!!!! Very nice to use!!!...... now wheres that compressor???!!!

About 60 clams (rrp $57 or something), maybe a little cheaper than the staun ones, and i wont lose this one!!! Plus, nice and quick!! Im tipping about 20secs all told on each corner (including fitting it and releasing air). Hopfully give it a test run tonight!

Got my hands on a brand new ARB 'ez-deflator' today, the build is great, although i havent got a compressor handy, so haven't tried it out yet....its supposed to allow you to drop a lot of pressure in 2/3 of f$%*& all time!!!! I'll keep you posted with performance - anyone else seen/got one yet ...