Outer Limits 4x4 Board

I got a couple of these at the same time (boost and pyro) and found that the tech support (via email) was great when I had programing problems with mine. I would go straight to auberins by sending them an email, I always got a fast answers that solved all my problems.


Luke

Gday guys
Be careful when you are buying these pto's as the rangie and 110/stage1 versions are quite different, its very hard to fit a rangie one to a 110 without cutting the floor. Sure the gearbox is the same but the pto had different orientation and different distance between input and output ...

The 80s came out with the 1HDFT from 95-98, they are definitely the ones to get but demand for them is high and so is the price. There have been a few on carsales lately that would be a good place to start. They did come out with an auto so you should be able to get what you want just depends how ...

I thought that turbo light was overboost, mine used to do it when I was up in big time in the low gears...

Turbo light is definitely overboost think its set on 10-11psi (not sure exactly) not a problem as long as its only flickering occasionally.

If I were you I would be asking previous owner if he ever replaced the big end bearings, if not then at 270km they need to be done ASAP. From what I have read they need to be done every 100km for piece of mind, not a big job, but I wouldn't be driving if it were mine till I knew the big end bearing ...

Harrop engineering (vic) sell them, I don't know where else you would get them, they will freight anywhere. I got an email quote about 2 months ago and from memory it was about $1600 per locker complete (front or rear for 80s). I will be getting one as soon as funds permit, got to be better than an ...

Try here

http://forums.bauchan.org/portal/downlo ... cid=17&p=1

I have two of these gauges one pyro and one boost. Anyway I had the car tuned a few weeks back and the mechanic checked my pyro with his hand held infra-red thermometer and commented it was miles out (like 100 degrees C cooler) anyone checked the accuracy of theirs? Wonder if its just difference in ...

Has anyone seen or had anything to do with these (see link)? They are very cheap compared to Kaymar etc (1/2 the price). Finish doesn't look great from the pics but I am more interested in if they are tough enough to last the distance. I wonder if this a case of you get what you pay for...

http ...

My cruiser has a UHF and working cruise control, not sure why a UHF would stop the cruise working. First thing I would check is the switches on the brake and clutch pedals (if manual) if these are faulty cruise won't work. Not sure where you would go from there, maybe someone else will have a better ...

Theres one on carsales now. No affiliation to me.

http://www.carsales.com.au/used-cars/private/TOYOTA/LANDCRUISER/details.aspx?R=6835252&sort_type=3&Make=TOYOTA&__Ns=pCar_Price_Decimal|1||pCar_PrivateSpecialFlag_Int32|1||pCar_ImageCount_Int32|1&Model=LANDCRUISER&__N=4294962861%200%204294962570 ...

The 1HD-FTs did not have the same bottom end problems the earlier 1HDT did. You should not need to replace the bottom end of one but you will if you buy a 1HDT with an unknown history.
As an owner of a 1HD-FT (1995) I can only rave about the power and fuel efficiency (11-12L/100km), and say it was ...

mike_nofx wrote:Which ones have the viscous centre diffs?

all the ones with ABS.

Got mine in the mail today.

And a BIG THANKS to thehanko for making the whole thing happen.

Good news, thanks for the update.

Dominator, I think people would be greatful as long as there was communication. The original discussion was the order would be placed when 10 people paid. That has occurred so all we require is a status update and I think it would lay everyones concerns to rest.

I agree, there is no hurry at all ...

Over a week now and no update?

I wonder where this is up to, I hope we haven't lost our cash

I am getting concerned too. Wish I had done it on my own I would have the thing by now. I really hope we haven't lost our money.

Tried to call him but his office is only open Wed-Sun. I'll be in Syd ...

Thanks Fester for clearing that up.... I feel sooo reassured now.

Hanko has left the country.....

I really hope your wrong for all of our sakes, I am starting to get a bit worried......

I payed on Sunday.

For those fellow 80s owners, I am planning to fit mine in the dash above the radio (and below the clock) in that useless little slot (that is only big enough for a bank card) that some of the overseas models had a pull out drink holder in. Its the perfect height to slot in there with a bit of infill ...

Yes let us know what to do next.

I think I will opt for the green display instead of the red as in your current list (with the long probe of course).

Cheers
Luke

Thats great, we are up to at least 10 so we can go ahead with the group purchase.
Can I ask why some of you want the one with the green face? Just trying to decide myself and was wondering why quite a few prefer green over red are you just trying to match other instruments or will it have better ...

What offset do you have on those rims Mimmo?? are they disco rims thought the tyres would be too wide for a 5.5" defender rim??

Cheers
Luke

Thanks for the replies. I guess next week I will take off the speedo housing and have a look and try to check the centre diff preload tho the method the manual suggests is more than a little confusing javascript:emoticon(':?')
Confused. The play is causing havoc with my handbrake hence the need to ...

Gday all

After some help on this topic. I have an 85 isuzu county that has noticable play in rear output shaft that can be felt at the handbrake drum (moves up and down couple of mm). The front shaft has no play at all. I have taken off the rear drive shaft and checked the torque on the big nut on ...

maybe something like this?

http://www.aulro.com/apc/showproduct.ph ... =401&cat=6

Few things around, I have a bar that fits across the back with a babyseat attachment clip thing on it.

Luke

My 110 county with NA 4BD1 weighed about 1900kg last time I weighed it with 2 people, half full fuel tank and has bullbar, side rails and winch. Is this what you wanted to know?

Luke

Gday All

Dabbled a little in changing ratios of LT95 t/c myself after changing ratios for the v8 for better cruising and then after conversion to a 4BD1.

I bought a stuffed LT95 suffix 12C for the 0.996 gearset and put them in my county. For better highway cruising I had 28/43 teeth (with v8) and ...

As per workshop manual
On the rear of the transfer case just below and to the side of the filler plug
is the suffix number
Suffix A + B - 1.174:1
Suffix C -1.113:1
Suffix C from gearbox No.35594060 C - 1.123:1
Prefix 12C -0.996:1


Courtesy of Michael in another thread.