Outer Limits 4x4 Board

Ill sell you mine for $1000 needs sump gasket n passenger front panel... excellent for parts !

My feroza is in the same situation, it would be good to get it back on the road someday, but think ill get another one later in life... Mine is located in Canberra, if anyone wants some more info PM me

Sad to see all these daihatsus comin off the road, hope someone else can put em to good use

ive got my 89 for sale $1600

its a bit hard for me to describe, but it connects to the block about halfway down with a 12mm or 14mm bolt, its got a thin piece of steel coming off it down there and connects up just under the exhaust manifold...

...

Yeah mate checked coolant flow its no problem, temp is hot.
I put about a half can of WD40 in it and drained it out :D
I was just wondering if you should be able to move the valve freely.
Ill chuck it back on in the morning and have a look if its working.
Either way is good because ive got a ...

ok fixed that last thing (gotten worse since puttin back together) a vacuum wasnt connected so disregard that...
I am still having the problem with the valve not closing, i can not physically push it closed with a screwdriver which makes me think it is jammed...
I just need to know how hard I am ...

Im talking about the valve inside the throttle body just before the butterfly... i took off the TPS aswell and has a look all seems ok, although since putting the whole thing back together this seems to have made things worse... even with my finger blocking the valve i am getting a high idle with ...

Ive just pulled off my thottle body to fix this problem, it seems i cant push the valve all the way closed, it should go all the way in right? ive put tonnes of WD40 in there (both sides) and fiddled with it... will it eventually "click" into place? or is it worth grabbing a new throttle body? Ill ...

my 1.3 charade had the exact same thing as well as my feroza and my old mans.

http://www.youtube.com/watch?v=XR59-ys7 ... h=daihatsu
if you havnt already seen it...

Hey people,
I just picked up a soft top for the roza here, ive got most of it on, now it seems i need 12 "hooks" to secure it to the body... I dont have any of these hooks, i can see the points of where they go in... Does anyone have any spares or know of another solution?
Cheers
Rob

AVALIABLE

1990 Feroza, oil leak, front passenger damage, rego till august. quick sale

Original Daihatsu F20 Workshop Manual

Feroza Parts -
Soft top, white, with frame and bolts
Rear Windscreen
1x Full set of original rims w/ crap tires (1 jellybean set)
Black Box that goes on top engine (no ...

Mine has no electrics either... the rubber plug was there in the door, but into the body there was nothing... so i drilled it out! Decent hole and use another rubber plug to protect the cables from bare metal, and also some cheap black tubing to run the cables through... You might also if interested ...

search for seatbelt fix? remember seein it a while back... hows that goin btw?

I heard feroza and rocky take the same bullbars?

lol drewe thats bad luck... the edging on mine is pretty poor too close up, in fact, i didnt trim it at all, just got the dimensions right and the metal shop cut them up, they fit fairly nice, i could round the edging but havnt bothered... it does the job (support the weight of heavy 6x9s).

Check for bent up underneath to see if its been racked... i couldnt pull off my gearbox support to replace the mount (also engine mounts are often broken) due to it being dinged up, shows the guy who owned it last did some hard driving in it...

Not the cheapest setup, 3mm checkerplate was about $50 all up... new jigsaw blade too... but looks the sh*t ;) - just make sure you insulate the checkerplate against the steel, i used a thick foam tape sorta thing, but it still rattles a little under heavy bass, have to work on this... Also for when ...

just press all the buttons in any particular order... thats how i got it, couldnt tell ya how...

i think detomaso too hard to get and too expensive... get an applause engine cheap, torque cam, exhaust, extractors, maybe computer... that should give similar performance to the detomaso 1.6 motor.

Check out jaycar for electrical accessories... You can get some real good battery connectors that have 4x8gage outlets and a voltage readout. Also you could put a distributor block in the back... then you can add on whenever you want without havin to screw around with installing too much cable.

Yeah mate windows down and sunroof lifted does the job fine for me... wouldnt mind gettin a wind deflector if they are around tho, constantly gettin smoke ash in my eyes!

Im at 198000 km... Heres what is planned...

Sump seals
Timing belt
Dizzy O Ring (slight leak)
Throttle sensor etc. (see high erratic idle)
Fanbelt
Engine Mounts
Possibly alternator
I might rip the air con unit out too as i never use it

Thats bout all i can remember for now, i have everything ...

Youd be surprised what you can send through aussie post... I did parcel post for a year and some of the boxes took up a quarter of a mercedes sprinter!

The feroza doesnt have a normal sump gasket, instead has a seal on each end about 2" long, goo around the rest...

On mine the front sump seal is gone...

anyway to fix this leak will involve taking the engine out like i still have to do...

It is a fairly common problem with the feroza, worth ...

check for oil leak on front or rear of sump, it is a very costly fix :/

$300 gotta be kidding, i remember a nice set goin for $120

Yeah fair enough it is a daihatsu board after all

The hack cancells out the need for the usb dongle...