Outer Limits 4x4 Board

Heres one of the ones ive made, its the one im using on my rig and i find its cool-warm (hot weather will heat it) when you drive and park it will get some heat soak ut in general it stays cool while driving with cool air comming in...
http://i96.photobucket.com/albums/l169/mr_gt/Hulksta%20V8 ...

What lights do these kits fit?

Thanks Jes

Got a GU box in mine too and is smooth to drive but when im on rocks etc all flexed up and really need some power in the steering... it feels like im driving an old falcon without power steering

Ive just fitted the v8 and using the holden pump and hoping this fixes it...

hey guys, I am looking for a new design project. I want to design and develop something for GQ/GU's. I bought a rolling chassis the other week so i can jig stuff up and get better measurements. Here is a few things i have been working on, but if you have any other thoughts let me know.

Which one ...

Hi guys, ive just fitted GU rear end in my GQ and found the the old tailshaft dont fit the GU... the GU flange is smaller and has female alignment (looks to be the same as the GQ front diff flange) the GQ has male alignment and a larger flange...

The GU diffs have 4.6 gears i plan to keep but i'll ...

Does anyone know the ratings of fusible links? Ive got 3 im trying to work out (the are out of my 90 model mav)
Black
Green
Pink (could be faded brown?)

I think the black is 80amp? but not sure on the others

I called the RTA in regards to the new rules today and advised them that i (like many others) cannot find an engineer that is not booked out. and asked what i could do?
The RTA gave me the name Dan LEAVY,
Dan_LEAVY@rta.nsw.gov.au

Dan is the principle policy manager, light

I told him i had being ...

Yep they know it exists ;)

Good on you for sending an email, but dont stop, everytime you think of somethink else sent them one.. they are public servants there to serve the people...


Heres my mailing list....
michael.daley@daley.minister.nsw.gov.au, office@daley.minister.nsw.gov.au, alex.ryan ...

When they were going to close 4wd access to Hook Point, 150+ 4wd's & the media turned up and parked there for the day in protest. The government was DEFINATELY going to close Hook Point but after that stunt they back peddled and it never went ahead.

I reckon something as simple as a large ...

mr green wrote:

StarkRavingSimmo wrote: so how about when and if a protest rally is properly organised, we leave our cars at home, catch a bus and let the body numbers do the talking.

This is the only way we can be respected as people with rights

Has everone stopped emailing the pollies?, if we stop they will think we have gone away, everyone needs to keep emailing them even if your just resending you original email and just add an extra comment each time... and keep sending them untill they get back to you with the answers you need... or an ...

Too right! we need to change the publics opinion and the only way we can do this is if jerks dont drive modded cars!! they give people who do things right a bad name and then we suffer, the VSI50 is one fine example :bad-words:


I know everyone knows the jerks im talking about.. the ones that use ...

Fighting a law change with threats, violence or any other illegal means is not going to work. :roll:

Sure it will!

"15 people dead, and $10million damaged caused in violent protest over not being able to raise a 4x4 more than 50mm"
Then every copper across the country will hound 4wds :roll:

Out of curiosity, Where is the height measured to determine how much lift you have?

What i mean is, if an officer were to pull out his tape measure, and check that you arent raised too high, how would/should he go about it??>

Mike

VSI50: http://www.rta.nsw.gov.au/registration/downloads/vsi/vsi ...

shortyq wrote: 7k fine for breach of regs!

Wheres the info on this?

My daewoo supension is that bad that when my kids are in the back it drops 4-6" will that make it illegal? cause it all stock

They want us to all drive stock standard sedans.......what a PITA!
No... they just want us to work for bugger all then pay them income tax and GST on everything... they dont want us to have fun, they dont make much tax from that...

Will they give us the taxes back from all the mods we paid taxes ...

How did you go with this Dan?
I havent heard back for procoat yet but i did hear back from Hi Octane

Hi Dan

Ok i can coat them in the black or polished silver
Black is rated up to 1000deg
The silver is up to 600deg

Without seeing them they could be cheaper due to the length

Pace maker ...

Yeah i actually found the stick on stuff the factory uses these days

Thanks guys, ive sent an email so i hope they can do it soon

Anyone know a local who does ceramic heat coating of headers? Im hoping to get them done asap and not get stuffed about with postage

Also anyone know where i can get some stick-on heat sheilding to stick on the floor pan above the mufflers?

im not sure what do you mean by a gas lense?

FYI, after work tonight i ground the welds back and attemped the weld again and all was good, no more porisity! i must not have cleaned the surfaces properly in the first place, welds look sweet as now would definatly snatch off them.

Thanks for the ...

fester, the lug is just plate steel welded at 90 deg to the box (a fillet weld i believe) fiftyfrenzy, the setting you have suggested is pretty close to what i am running, im using thoriated (red tip) tungsten with size 6 gas cup sharp point on tungsten about 5-7mm stickin out depnding on the room ...

Yeah I would grind back your weld (get rid of the contamination) and start again... but thats just me hey;)

Clean, clean, clean and clean more before you weld... i wipe the rods with metho too, with alloys i wipe rods with scourer & metho

It wouldn't hurt to get some scrap metal in the same ...

Any chance of a vid to see it in action?

No probs.. The centers will swap tho as will lockers

Nope nor are the axles

Might have something to do with that pajero? Thanks for sharing the info with us

Im keen for a set of slimlines for my xgt's