Outer Limits 4x4 Board

cheers sounds easy enoungh

How hard is it, whats involved in installing a pair of coil spacers. GU Patrol coiled front leaf rear.

ive got a GU ute leaf sprung rear, ive currently got a 4 inch pro comp kit which is useless. we could only put 2 inch leafs with 240 mm shackles which has worked but has no slop. I have been told by a few that i cant have bigger softer leafs and some say that i can, any ideas? without coiling the ...

How illegal is it to change, swap the leaf spring from under neath the diff to above diff, gaining 6 to 8 inchs, and has anyone got photos of this done?

where in Brisbane can i get rear leafs for my GU that will articulate and will suit a four inch lift kit, the ones i have now are a six pack and are stiff as nails

are the custom trays mounted on the origanal chassis mounts?

spoke to on track today and was told that they may just need servicing, it could also be an axel seal needs replacing when i told him i was running 33 MT Claws he said yep, there probably rooted, any way the tell tail signs are there of a stuffed cv, clicking on hill climbs and cornering

busted the drivers side cv yesterday, never fixed one before
whats it worth supply and fit? 2000 Gu
gonna do both sides.

TD42 wont rev

blocked like a 12 year old, unblocked it runs sweet

checked out the related thread, excellent info, have a look this morning

the little thimble filter inside the pump fuel inlet fitting

is that the one above the fuel tank, the size of a camera film container?

97K, new air filter ill put a new fuel filter on sunday

porblem is, when it gets to running heat, form 1st, 2nd then 3rd gear its got fark all power, it just doesn't wanna go, the 4th and 5th it goes like a champ. WHATS THE PROBLEM???? I have been told that it might be the injecter pump, to dirty or completly shagged, when i get it back ill run some ...

I have a set of heavey duty leaves, they have 9 leaves in total
came off my GU troll
got no use for them, don't want to dump a perfectly good set of leaves!

(for a GU) don't know if its tybolic or hybolic leafs, but there only two leafs and very soft, has any one had any experence with these are they good or crap and who suplies them in Brisbane.

yeah have had the rad done im thinking of going twin thermo or twin fan maybe tyre pressure i don't know ive got 33 BFG A/Ts

just got back from ormeau and didn't have any dramas with the over heating and i farley pushed (low and high range) it only heats on the beach!

Are you running standard cooling system? if you have a thermo on there without a shroud that could be a problem because instead of drawing air through the entire radiator it only draws it through the area of the fan. If you aren't already using standard set up use that because they didn't overheat ...

done the radiator flush, made no difference

I have a GU td42 6cyl troll and every time its under load beach bush etc (high and low range) it over heats repeatably. Every thing under the bonnet is sweat so i don't know whats going on... if anyone has the same 4b and has had the same problem what has been done to resolve it?

same motor but don't have the guage

took my GU for a run up Double Island pt on weekend anyway we got there 1hr before high so we were in the soft sand all the way up. the car kept over heating if i went to low range it cooked straight away so i kept in high 3 and sat on 2 the whole way it was warm but not hot (the radiator was ...

Thanks for that guys

have a winch for the first time (9000 WARN) on my GU, I have never used one. when you winch a hill are you supposed to assist the winch or just let the winch do all the work. another thing when it was releasing the cable it sounded like it was struggling and the cable had kinks and bends in it, its ...

I'm thinking 100 x 50 might be to heavy, its a full tray I wont be chassis cutting it

I am wanting to build a steel tray for mu GU. I will be useing 75 x 50 mm RHS for the sides and 50 x 30mm RHS for the inside support, 20mm difference to allow for a lip around outside of the tray. Would this size steel be enough support, i wont be carrying much? I am thinking of checker plating it ...

its probably been asked 15 thousands times already but f it, ive got a 2000 DX GU leafed rear and would love to know if i can dump the leafs and coil it with disc brakes?? any help

Go with Koni, or OME.

are Koni adjustables any good and what are they worth roughly?

picked up a 2000 GU on wednesday last week, its the 4.2 6 cyclinder DX ute. all stock standard for now until i sell my luxy. i have put my 33 BFGs on it, and put my CB and CD player in. it has a big steel bullbar with a 9000 Warn winch on it and heavy duty hayman reece on the back. it is the coil ...