Outer Limits 4x4 Board

Will a swb vit windscreen glass fit a lwb?
cheers Scott.

yes the driveshaft lenghts are different,also when changing the pedal box and shift boots make sure you get lwb parts for lwb,swb for swb,as they are slightly different,on my conversion i left the transmission module connected as otherwise the check engine light would light up and i took the globe ...

if you remove the evaporator you will need to get the gas taken out first,then regassed once refitted. you could try some kind of de-odourizer like glen20 that kills mould and disinfects. you might be able to reach the evaporator by removing the heater fan relay and spraying through the hole. hope ...

yaeh, I put a more agressive reground cam in my old sierra,was great on road,gave me a bit more top speed,loved to rev.However I did lose a bit of low down torque,but with series 1 rockhopper and only 31's it was not enough of a loss to really worry about.

thanks for theb input guys i'll try some fully synthetic next

i have a 2.0l v6 vit and it has one noisey tappet that quietens down once vehicle is at operating temp(a good 5kms) Are the tappets a shim type adjustment,or are they hydrolic?,maybe i could remove them clean in petrol perhaps?(like the ealy gsr lancers with their tappet issues) As i have noticed if ...

Hi all,I have a lwb vit and want to know an easy swap for my rear flexible brake hose as mine gets tight on full travel.
Cheers,Scott

the 16v starter is a gear reduction type starter,use it.

inhibitor switch lets you start the engine only when you are in park or neutral.

I recently changed my auto lwb vit to manual,and as for the electricals I closed the inhibitor switch circuit.At first i left the transmission module disconnected but found the check engine light to come on,so I plugged it back in and removed the overdrive light globe in the clusyer to sop it ...

g'day Nic,when i put this engine in my sierra,i already had extractorfor the g13a,i bought a header plate ($50-$60) from an exhaust shop,cut the sohc plate off and got the dohc plate welded on as the spacing between the ports is the same,i also got a nut welded into the pipe to mount the o2 sensor ...

sorry i can't help you with that,as i was 4 years ago when i bought it.

98 model cino is the one i used

you can also use the thermostat housing off a 1.3 suzuki cino

Thanks for the info cj

has anyone done a g16b with the gti twin cam head,pistons,but running it with the standard g16b computer?as my vit needs a rebuild and i have the extra parts.was wondering if it was worth it or just do up the standard head(port and polish,maybe mild cam)?

I have a 96 v6 vitara and whilst resealing the sump I found the front diff didn't have any vacuum pump lines going to it.I thought all V6 vits had a vacuum operated engagement,as I had the auto hub as well (changed them to manual as i don't trust them.) Also when ignition is first turned on or off I ...

OME springs are manufuctured in sydney by monroes using steel from onesteel.