Outer Limits 4x4 Board

Actually all Im after is to be able to use the same size rims on the trailer that I use on the vit. Any suggestions?

Hi everyone. I have an old.. pretty old home made trailer I purchased recently which has combi 9inch hubs & wheels on a straight tube axle. Trailer itself is in pretty good condition. Would like some expertise on the following questions. 1. How hard would it be to make up a new tube axle using ...

Hi all, Ive got a 60s which currently has worn 31s on 15x7 rims. Ive got a spare set of 15x8 rims under the house. My question is, which size rim is better for off raoding? Am going to get 33s either way, and I do a mixture of rock, dirt, mud etc...

Does rim size matter?

Thanks

Had my 2H turbo'd late last year with just under 370k on it. Compression test showed all cyl still very good. Runnin about 6psi boost & so far no probs, except a small temp increase when doin about 2500rpm. Keepin it down to 2000rpm til i figure out what to do next. Have oil cooler to fit when my ...

Thanks guys. Is it a difficult thing to do for a learn as you go type person like myself (have swapped gearbox & bodies on other 4x4 & made my own rear bar for this one), or is it mainly just time consuming.

Thanks, gonna have to get my roof looked at.pretty sure its worse than it looks.

Anyone have any experiences/recommendations for places to fix roof/gutter rust? My 60 has some poking out from under paintwork near gutter. Thought it was a bird do do & poked my finger through the roof when i went to scratch it off. :-( Didnt press very hard either. Would prefer west'ish if ...

I made some sliders for my 60s. Bought an 8m length of 40x40rhs & a couple of pieces of angle for just under a hundred bucks. Welded em up with a mate of mine & put em on. Have copped a lot of hits and they're still holding together. would put pics on but not sure how to. better than spending 600 ...

Well, thanks all for your input guys. Is very helpful. So far have been sitting in car letting it idle while it cools down. Can see that method being a bit of a pain sometimes. might get a timer oneday. I guess brand isnt such an important thing. Another question though: I have heard that blow off ...

G'day, Got turbo fitted to my 60s diesel. Goes good. Just wondering who has experience with turbo timers. Are there any to definitely steer clear of, which ones are recommended. Does any turbo timer do the trick? Thanks.

Hi, I have been contemplating putting in a 2nd had turbo in good condition, or putting a complete extractor/exhaust system in my cruiser. Car has done round figures 357000 kms & I believe engine is still original with no work done on it. Car goes good, but I'd like a bit more ooomf out of it & a bit ...

G'day all... thx to Chiefboy for postin this prob for some ideas. Thx also to all who have givin feed back. Now its time I stopped procrastinating & did somethin aboutmy dilema. It actually used to happen also when the tank was almost empty, but for a long time now, it only happens when doin good ...