Outer Limits 4x4 Board

Cheers mate yeah its an early 2L fitted with aftermarket turbo ...rebuilt and all...im trying to figure out what I have so its rego as a RN106R....what does 106 stand for? Also my vin I jt731rna40800 can anybody shed some light on what my vin reads as I know Japan Toyota and 7 stands for passenger ...

i need fix the rear output on my hilux how do i figure out what seal is needed and what gbox i have also any help on removal and reinstallation of said seal is greatly appreciated
Cheers
BOURKEY

hey guys i have a 2L-T powered rn106r and want to know what gbox i have how do i confirm what gbox is behind the old oiler

Cheers mate yeah mine is registered as a rn106r but has had the 2L fitted and a aftermarket turbo bolted up and I'm not sure if its supposed to be a dual cab or not but it has the single cab fitted so I'm so lost with this truck...but all in all its a good old rig...just trying to get all the info ...

[ hi guys i have a rn106r hilux and trying to figureout what this means apposed to ln106 and the rest mine has had engineers cert i believe for the cab swap to single cab and forthe 1 ton tipper its a bitsa...mongrel ifu like so i am just trying to find out what i have got lol cheers and i couldnt ...

Hey guys I'm asking a question that no1 has been able to answer yet....is there a patrol transfer that will bolt to a terrano Re4r01a gearbox to give me a right side out put shaft thankyou in advance "Bourkey"

Looking at getting a cherokee just after facts from mid 90 models wat to look for and wat kinda price is fair also any real lemon models cheers bourkey

??????? what i dont understand moglux

ok next question

i want to use a commy v6 and auto wats the deal with running the computer and wiring to make the motor usable?
anyu info greatly appreciated
Cheers Shaun

with min 11/2 braces of same material.


what does that mean

hey guys i have searched the net and this forum and am looking for info on type of tube to use and sizes to build a tube rock crawler and any design pics or ideas
looking at running v6 commy auto and a mk/mq seperate transfer case cheers
bourkey

i have heard about scrub angle and been informed on what it does so my question is how does running off set rims/ wheel spacers affect your scrub angle and there for your steering and braking and tyre wear negativly?

thanks so the chassis are similar width? Is the any other things i need to be aware of also approx how much wider are they if any

gday i have picked up a tray back rocky 2.8 diesel cheap and would like to change the axels....and soa them \just looking for suggestions have thought about 60 series and would like to gain some track width also the advantage of being able to fit lockers thanks shaun

i use 1 for work and yes have a great carrying capacity great hwy 4x4 would be good for beach and such ...not too impressed by the gearing because they are capable of 160+kmh means the gearing is rather hight and even in low 4 in first is rather high and would not be real suited to climbing in my ...

will a mk body swb fit onto a swb gq chassis as i would like to keep the old look with the coil set up also are the chassis rails wider than a mk chassis as im thinkin bout the steering box location
Cheers

check ur float level on ya carby make sure the fuel level is at or below the line on the sight glass ass it may be having a constant drible into the throat of the carb acting as tho the choke is on ..also check ur spark lead if the leads are on the right plugs as i had the same problem just recently ...

is a stinger bar legal in nsw ?

any1?

will do when i get around to fitting mine afteer pay day..lol broke atm and it sux but i will post pics and explaantion how when its done
Cheers Bourkey

use a piece of 90degree pvc pipe 6 inch in diamiter then cut the edges to fit past the alternator brackets then use a large hose clamp around the alternator then the the pvc and im goin to make a plastic / tin shield for the front to further limit the muds penetration
Cheers

i com 1c400pro for the in car and the hand held ... tk338 write that in on ebay and pay 60 bucks + postage from hongkong so around the 120 mark and u wont regret it as i have had mine for just over 6 months now and on an outside arieal in my car can perform as well as my mates uniden in car unit 5 ...

i need to know both front and rear also the strength as i want to run a wide strong axel under my daily driver mk patrol
Cheers

just wondering on the width of the f-100 4x4 /bronco axels apposed to the gqs and if the diff center is off set on the rear or if it is centered on the fords

What colour is the smoke? if its black check your float level in the carby and if its blue its more than likely rings and if its only when u start or idle for a while it is probably valve stem seals...i have had the float problem just recently and now have had it fixed
Cheers Bourkey

can some1 write up a list of exactly what is needed to complete an engine transplant as my plans have been moved foward about 3 months its a injected falcon 6 into a mk nissan patrol just the neccesitys plz i have searched the bible to no luck
Cheers Bourkey

simple reply
they later mks after june 85 used a different slave cylender also give ur fork a nudge it may just be a little out

i was no good in english they are 31x10.5 easy balance they have not had any probs with the balance or the tyre itself and i find them very quiet compared to say a bfg mt on road they have an amazing grip in the wet and off road is the same

the khumo road venturer mt...i was asked to let ppl know how they were goin wen i got a chance and some ks under its belt all i can say is a farkin good tyre wears fairly well for a mt on road and off road love the traction not the best on sand tends to dig but still usable for a soft compund has ...

the unidens are a great radio..but some have been know to only output 3.9 watts factory and yet claim 5 and flimsy electronics and dials and shit really for a 4b piece of shite but in a townie car say for the missus etc they aint bad the i com are used by the aussie military and also they use the ...