Outer Limits 4x4 Board

Yes it will, but need to check if both transfers cable driven or electric (monopole) speedo,

Anyone help with an 80 series and LN111 extra cab diagrams ????

second that

I put ct20 on my 3l not a drama, took me 3hrs and bit of stuff around tuning with no pyro or boost gauge. Mine has no intercooler and i run 35's /4.88 ratio diffs/g52 box and get around 15L/100km.I put it on at 220000km i have had it on for 40000km's and hasn't skipped a beat.

I did the CEM thing in my 2.8 lux as i was only getting about 4L of oil out each time i found once i ran the CEM flush got about 5.5L out dont ask where it was hiding and after about 3 oil changes doing the flush the oil didn't stain my fingers anymore, imo well worth it.

I say stick with the 3l now there is plenty around and parts are getting cheaper, turbo'd mine for $500 second hand included nearly all plumbing except for about 1 foot of intake easy fix, and for your info ct20 is water cooled also but this was all included with mine. I run 9psi and tweaked the ...

Im am running a standard 2" lifted spring without relocated locator pin, but probably dropped hanger and relocated shackle mounts are giving me the clearance, but if you have moved your axle forward you should still have more clearance than me and after closely looking at the pic it looks that you a ...

thats a nice picture but, my ln111 came with 4.56's and my mates ln106 came with 4.1's their is a post on pirate somewhere which shows how to read and break down compliance plate to identify axle codes

What is going to hit, track rod or drag link i have no drama's with mine but i do have under chasis shackle mounts, if only drag link is going to hit have you looked at a dropped pitam arm

I run ct20 turbo, snorkel and 2 1/2 exhaust and mine whistles even at idle. As long as its making boost seems strange to have no whistle are you running a boost controller or anything?

Just talked to a couple more engineers this is the way it seems it will go
100 mm suspension lift (and may be lift overall ie tyres included)
Tyres 15mm over largest tyre and wheel combination on tyre placard
and no more than 25mm wheel track increase.
Road testing and roll over indexing.
And ...

Spoke to 3 engineers to about getting my lux done, and all 3 wouldn't have a bar of it something to do with an RTA bulletin, and one even suggested reversal of previously engineered vehicles. Does anyone know what the go is?
And where around sydney/wollongong area is an engineer who is resonable ...

my 97 extra cab has 2" body and approx 6" susp with 35's and i have been happy with its handling. i did the solid axle swap 8 months ago and only returned it to ifs width about 2 months ago with only marginal if any handling improvement. My missus drives this vehicle as a daily driver and has no ...

Anyone tell me how Maxxis creepy's wear ? (37"), my hilux does bout 100kms on road a week and prob 40kms on heavy off road stuff (rock, sand, gravel). Currently running yoko's done 2400kms have 4mm tread left :x (was warned) I know creepy's have good starting tread depth so what k's can i expect.