Outer Limits 4x4 Board

Floged out shockie rubber mine did it a little then really bad one day Hmm no rubber left :oops: also look at the top shock mount the 2, 14mm?? bolts may be loose.

Turned out that this seems to be the problem. Bottom bush on the shocky is rooted. Are these a generic replacement? or is it ...

Floged out shockie rubber mine did it a little then really bad one day Hmm no rubber left :oops: also look at the top shock mount the 2, 14mm?? bolts may be loose.

Turned out that this seems to be the problem. Bottom bush on the shocky is rooted. Are these a generic replacement? or is it ...

Hi Guys,

I've had a strange knock in the back of my 1992 80 series GXL for a few months now and heaps of time spend gazing underneath the car, I still dont seem to be able to figure it out.

The noise sounds like a metal to metal clunk, and only happens over short sharp bumps ( i.e. speed bumps) It ...

Thanks heaps for the help

My rig has about 230,000 kms on it.. so its a while to go yet

cheers

Hi,

I just replaced the clutch slave and master cylinder on my 80 series !hdt
( the clutch system with no booster)

Put the parts on sweet as, bled it, checked it for leaks and the clutch pedal feels great. The problem I'm having is that the 'bite point' of the clutch is right up at the top of the ...

Hi There

I have a 1992 GXL 80 series and am having problem with my drivers side window motor. The window was getting stuck (proper stuck) when lowered all the way down.

I have taken the regulator and motor assembly out of my car and noticed that some of the electric motor casing (black plastic ...

Thanks Heaps for the replies

Will get a lil more coin together and get it all done

Thanks again

Nik

Hi

This is a two part question for you Diesel Gurus on this board

1. I think it is about time to get the injectors and Injector pump serviced/ Rebuilt on my car. I've done a bit of a search around the internet and various 4x4 forums to find out a rough cost of getting this done, without too much ...

It won't be diesel leaking, it will be engine oil which is coming into the inlet tract via the PCV system.

Either sit back an enjoy it, or fit a catch can to the PCV line between the rocker cover and air intake pipe.

And if replacing the gaskets, did you order the rubber washers as well?

Thanks ...

Hi

I have a 1992 80 Series 1HD-T landcruiser with about 220,000 kms on it, the engine is completely standard. I have noticed a leak coming from the bottom of the intake manifold which appears to be diesel fuel. It seems to be leaking out of the mainfold at the firewall end of the engine the worst ...

yeah looks a bit like ass to me

not a fan

Gday
Toyota had a recall on that model to close up the oil flutes that seperate the mist from that tube, next time u r doing tappets, do this.
You can also gauge whats going on by taking off the 710 cap (oil for a sheela) and looking at how much is coming out...mine is very bad and i wish 1 litre ...

Hi People

I got a 92 80 series 1hdt cruiser and have noticed a larger than usual amount of smoke coming out of my exhaust. at night time it appears to be of a blueish tinge. I took the pipe that runs from the turbo into the intake manifold off and it appeared to be very clean with only a hint of ...

Ok

inspected the bushes on the panhard bars (took the panhards off at each end and had a really good look) they appear to be in perfect condition.

backed the handbrake off all the way like ruffy said.. and it seems to have helped it heaps... it still shakes a lil bit at 110km/h but I'll put that ...

Thanks for your help guys..

will replace the panhard bushes this week

thanks again

Hi

I have a 1992 80 series 1HDT landcruiser GXL. and have a wobbling problem.
The vehicle has a 3 inch lift, 32Inch BFG AT's. adjust panhards, new steering dampener, new front and rear brakes.

at around 90-100km/h the car star wobbling like something is about to fall off the car. The wobbles ...

Hi all

Just wondering where I can get a new key cut for my 1992 80 series. I tried toyota at kedron (im in brisbane/ northside) and they said they sell the blanks but dont cut the keys.. :S

so yeah, if anyone can point me in the direction of someone who can do this, and a rough price that would be ...

ok,

but when it was on the hoist, the drivers side spring was in nice and snug, but the passenger spring moves about 1 inch.. up and down.. and it doesnt sit level either when its on the ground


i do agree that it doesnt sound right but as said i cant see how it would make a cluncking sound ...

ok,

but when it was on the hoist, the drivers side spring was in nice and snug, but the passenger spring moves about 1 inch.. up and down.. and it doesnt sit level either when its on the ground

Hi

my car has been clunking a bit for the last week or so, so i decided to put it up on a hoist and see what was doing..

turns out the passenger side rear spring has 'sagged' 1inch. the springs are put in correctly etc, and are only 1 month old.

when i asked the dude at the suspension shop for ...

i just recently did a 3 inch lift on my POS

sway bars dont fit back in.. i made spacers for the front out of 25mm square steel tube

the rear im still making cause im a slacker

sweet as

had my car on the hoist today.

steering dampener rooted
panhard rod bushes rooted
wheels out of balance

will order parts tomorrow, see how we go.

thanks for all ur advice, other than this the truck drives real nice, with only some slight vibration of the front shaft.. very minimal tho ...

ok so its too much castor... what is the problem here, what are the consequences of too much castor?

i was told to get the plates regardless because the bushes crack the control arms?

thanks for the help mate

i can weld allright myself, so i'll give it a bash, how much should i extend the sway bars down?.. just enough so it reaches?

.. im using the same size tyres as before i lifted it. BF AT 32's

will purchase a dampener in the next few days, probably a return to centre type ...

Hi all

just lifted my 1992 80 (t diesel) 3 inches. has lovell springs, dobbinson shocks and superior castor plates.

a few questions and issues tho;

1. The steering arm that runs parrellel to, but behind the front dif is extremely close to the control arms, to the point of hitting sometimes. is ...

Hi all,

my problem is that my windscreen appears to be leaking on the passenger side at the top. The water is dripping through the seal at the top of the windscreen as well as some how making it down the A pillar and onto the carpet.

I got quoted $160 through my work for a new windscreen and seal ...

Thanks all for the info.

trying to source one at the moment.

cheers
Nik

Hi all, just wondering if the updated gear stick surround from a '95 onward 80 will fit without too much mucking around into my '92 80.

thanks in advance
Nik