G'day all,
I noticed that the Series II Disco's have changed from the common swivel ball to knuckles like on Dana diff's, But unfortunetly they still have CV's, but They look alot bigger, Are they stronger? Are the axles still weak as piss?
Does anyone know much about the spec's of these diff assemlies ??
Thanks heaps
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Disco SII front diff - How Strong?
Moderator: Micka
Disco SII front diff - How Strong?
[i]DAS[/i]
MY05 4.4L V8 Range Rover Vogue
Series 2a Buggy....In the Building
MY05 4.4L V8 Range Rover Vogue
Series 2a Buggy....In the Building
Not really sure DAS. Hoping not to perpetuate BS, but I think the diffs are the same as the DS1, the axles are the 1.24" LR stock, the housings are obviously modified and I have been told that the CV's were smaller (when enquiring about Maxi front ends.)
BUT!!!!!!!
Sometimes I think a lot of people are not up to speed with the DS2 over the DS1.
There you go - a lot of words, yet so little info
BUT!!!!!!!
Sometimes I think a lot of people are not up to speed with the DS2 over the DS1.
There you go - a lot of words, yet so little info
Cheers
Slunnie
Discovery TD5, Landy IIa V8 ute.
Slunnie
Discovery TD5, Landy IIa V8 ute.
Who is online
Users browsing this forum: No registered users and 0 guests