Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

LS1

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

LS1

Post by cloughy »

Whos' bought one, where from and how much?? i'm after one with the auto aswell and all the goodies for a conversion

Thanks
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 275
Joined: Wed Aug 27, 2003 7:21 pm
Location: sunny melbourne

Post by 85lux »

i got an engine for 1500 off ebay. the guy had it for 2000 but had no bidds. i offered 1500 and he took it. basically a long engine with water pump and coil packs. so i need to buy manifold etc, etc. it was a warranty endine, had the piston probs. i'll replace the pistons anyway.
jim
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

$5500 smalls wrecking complete inc cats etc. auto was $3000 extra from memory
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

kermit was selling his a lil while ago... :D

I'd look at buyin a complete thats been spun into a tree. or had rear end damage. after floggin off front end bits you dont need you'd almost come up even :?

sorry couldnt help ya more :finger:
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

bru21 wrote:$5500 smalls wrecking complete inc cats etc. auto was $3000 extra from memory
Yea but that was 10 years ago :D
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

shakes wrote:kermit was selling his a lil while ago... :D

I'd look at buyin a complete thats been spun into a tree. or had rear end damage. after floggin off front end bits you dont need you'd almost come up even :?

sorry couldnt help ya more :finger:
Yea i kinda know what i need, done the odd engine conversion or 10 :finger:
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

cloughy wrote:
bru21 wrote:$5500 smalls wrecking complete inc cats etc. auto was $3000 extra from memory
Yea but that was 10 years ago :D
Does sound steep - any more up-to-date prices? I thought they went for under 4 these days...
Tetanus rolling on 37's
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

Post by 6.5 rangie »

Matt, i could get you the auto if ya want, want a rebuilder or good runner?
Late or early one?
Damien


--------------------------------------------------------
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

6.5 rangie wrote:Matt, i could get you the auto if ya want, want a rebuilder or good runner?
Late or early one?
Rather by them both as a whole, thanks anyhow
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Post by jessie928 »

one on ebay went for under 4000 complete with auto.
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

There at least three on there at the moment, I've been watching these ones, but not ready to buy yet, so mihgt as well post them up for you to check out I guess....

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... &rd=1&rd=1


http://cgi.ebay.com.au/ws/eBayISAPI.dll ... &rd=1&rd=1

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... &rd=1&rd=1
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

mine was a vx 2002 with 19500klms on it. the year before i bought mine they were in the 10k range apparently. I have seen many for $3500 no box but they have all been tampered with or have 100+klm. watch out for battery acid in the electricals etc as it is common as for the battery to smash over the motor then sit for weeks before the wrecker see's it. some i have seen have completely farked coils etc
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Posts: 826
Joined: Sat Mar 13, 2004 4:18 pm
Location: Northern NSW

Post by slosh »

I sold mine (03 Statesman motor, low kms with computer and t/b but no auto, accessories or wiring harness) a few months ago for $2800.

Sounds like there's a lot of engines out there that need a $$ spending on them, be careful.
Posts: 452
Joined: Thu Jul 31, 2003 3:21 pm
Location: Sydney

Post by `maddog »

I bought the one in my buggy for $1500 with about 60,000km on it. Came with computer and loom, had to buy alternator, injectors and coil packs.
Mantis Motorsports #346

[url]http://www.mantismotorsports.net[/url]
Posts: 33
Joined: Fri Apr 28, 2006 2:03 pm
Location: Northside brissy

Post by _RYAN_ »

Ive got a low k gen3 complete for a conversion.
Comes with 6 months parts and labour warranty.
If u wanna know anymore ring me on 0738652900 during business hours
regards Ryan.
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

Got one, VX series 2, 38,000klm's for 6k, CHEEAAAAP :D

Done a blackboard impersonation "upside down, upside down"

Hasn't been started for 2.5 years and kicked over first go, doesn't even rattle............Yet :roll:
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 28
Joined: Sun Jan 22, 2006 11:04 am
Location: Port Kennedy WA

Post by Stu'sBeast »

Check this site out, some good bargins come up in there classified section

www.ls1.com.au
88 Shorty Mav, 3" suspension lift, 3" body Lift, Tough Dog Adjustables, 35" MTR, Cheezy Racing lower control arms, and more to come
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

Anyone know about rear drop sumps for these???
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 452
Joined: Thu Jul 31, 2003 3:21 pm
Location: Sydney

Post by `maddog »

Yep I have one on mine.

You can get them from the US, they are a alloy sump from a Corvette LS2 (6.0L motor).

The cheaper option is to look for one from an LT1 motor. They are a regular tin sump. Another option is talk to Mercruiser who use a rear bulge sump on their marinised LS1 motors in boats.

You'll also need the oil pickup, windage tray and dipstick to go with whatever you go with.

Image
Mantis Motorsports #346

[url]http://www.mantismotorsports.net[/url]
Post Reply

Who is online

Users browsing this forum: No registered users and 11 guests