Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Need help .. gearbox transfer removal
Moderator: -Scott-
Need help .. gearbox transfer removal
Hey the gearbox needs to come out of my swb nh but cant be is to long with the transfer still attached does anyone know which section to unbolt?? or does it matter if i do either one?? thanks..
I think the normal procedure it to separate from the engine, slide back to disengage the input shaft, drop the front and slide forward again.
It's all quite heavy. My regular mechanic refused the job because he didn't have the right equipment. Another mechanic (who's a Pajero expert) separated the transfer case without removing the gearbox. Apparently it's a two person job to get it back together again - one inside the vehicle playing with linkages while another underneath moves the transfer into place.
Cheers,
Scott
It's all quite heavy. My regular mechanic refused the job because he didn't have the right equipment. Another mechanic (who's a Pajero expert) separated the transfer case without removing the gearbox. Apparently it's a two person job to get it back together again - one inside the vehicle playing with linkages while another underneath moves the transfer into place.
Cheers,
Scott
Who is online
Users browsing this forum: No registered users and 0 guests