Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
4.2TD weight?
4.2TD weight?
Does anyone know what the 4.2TD engine weighs?
Re: 4.2TD weight?
Going paatrol Bruce??Soundsgood wrote:Does anyone know what the 4.2TD engine weighs?
Jason
TIGGR6 - Got the plates but not the car...
Re: 4.2TD weight?
Hey Jason, yep that's the plan.Ossie wrote:Going paatrol Bruce??Soundsgood wrote:Does anyone know what the 4.2TD engine weighs?
Jason
Well my entry has been sent so I will be ready. All that I have to do is get turbo mounted, ecu tuned, engineers cert, make the front bar and paint it. Not to mention the running of fuel lines, battery cables brake lines etc. But hey there's 29 days to go!
It will be completely different to what it was last season and hopefully seriously fast. With any luck it will be tuned to around 500hp (to start with) but that depends on what boost we can run. Hopefully it will handle 8psi (which will be close to 500hp) The ultimate goal is about 650 hp which works out to around 250 rear wheel KW. and 7300rpm.
It will be completely different to what it was last season and hopefully seriously fast. With any luck it will be tuned to around 500hp (to start with) but that depends on what boost we can run. Hopefully it will handle 8psi (which will be close to 500hp) The ultimate goal is about 650 hp which works out to around 250 rear wheel KW. and 7300rpm.
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Who is online
Users browsing this forum: No registered users and 3 guests