nissan patrol MK 1984 2.8...
when i put my headlights on the back of the combo switch starts to burn... i took all the covers off, and only one of the brass bits gets hot... but i dont know what one or what it does..
im running a pair or lightforce 240's and 4 other spotties... lightforce are on a piranah loom... and the 4 others are on another loom... they both join to the hi beam at the back of the headlight, and are also on switches.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
headlight combo switch smoking...
Moderator: -Scott-
Does the problem happen with all your spotlights turned off? Presuming it makes no difference...
If it gets hot on high beam AND low beam, it's the common. But, without knowing if it's positive switching or negative switching, that doesn't help.
If it's the switch itself getting hot, that indicates that the switch itself is the problem. It would be good to pull it apart and clean the contacts - not necessarily an easy thing to do.
OK, I can't help.
If it gets hot on high beam AND low beam, it's the common. But, without knowing if it's positive switching or negative switching, that doesn't help.
If it's the switch itself getting hot, that indicates that the switch itself is the problem. It would be good to pull it apart and clean the contacts - not necessarily an easy thing to do.
OK, I can't help.
Who is online
Users browsing this forum: No registered users and 0 guests