Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

5 speed for BJ42

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 2
Joined: Tue Jun 13, 2006 5:50 pm
Location: N/W Sydney

5 speed for BJ42

Post by stick46 »

I have BJ42 with 4 speed I want to fit 5 speed
The car is basicly standard for road with some trail use.
The std BJ42 5 speed is hard to find
Can anybody advise which box I should use & what is involved.
Top
Posts: 285
Joined: Sun Aug 15, 2004 9:31 am
Location: Sydney

Post by dibbz »

shorty_f0rty is selling a 5 speed BJ42 for what it'd cost you for the parts alone.

I'm figuring the bellhousing/box+trans would be enough.
Top
Posts: 305
Joined: Mon Oct 17, 2005 10:22 am
Location: BRISVEGAS

Contact:
Contact JOHNZ

Post by JOHNZ »

Seems an expensive excercise to save approx 400 rpm in top gear.
LOVELLS-EFS-DOBINSON-PROCOMP-BILSTEIN-KONI-RANCHO-TOUGHDOG-BLUEMAX
COIL SPACERS from $46pr
4WD SUSPENSION & BODYLIFTS 0418780611 A/H PH/FAX 07 33512692 - www.zordos4wdsuspension.com.au
Top
Posts: 734
Joined: Sun Mar 06, 2005 5:25 pm
Location: Sunshine Coast Queensland

Post by midi73 »

A bj 73 box fits if you change the top plateand 4x4 lever. I have a bj42 top plate and 4x4 lever if you find a bj73 or 74 5 speed box. I put the bj42 box into my bj 73.
Cheers.
Dave.
Top
Posts: 2765
Joined: Wed Jan 14, 2004 10:32 pm
Location: somewhere out there

Post by shorty_f0rty »

yep.. got a 5spd with rebuilt transfer (about 18months ago) and 3b for sale... let me know if your interested..
Built, not bought!
'84 BJ42 - sold! :(
'79 Coiled and turbo diesel'd FJ55
Top
Posts: 27
Joined: Tue Mar 28, 2006 7:29 am
Location: Blenheim, NZ

Post by muddy12 »

You'll need to shorten the rear driveshaft & lengthen the front as well, since the 5 spd box is longer. If you have a PTO winch - it'll need a longer driveshaft too.....
Top
Posts: 347
Joined: Mon Dec 01, 2003 9:13 pm
Location: Wherever I May Roam (or Melbourne)

Post by V8 Middy »

There may be an issue with the cross member and handbrake drum. A mate of mine looked into this a year ago
73 Series Middy Cruiser 308 VN V8 OME 2in Susp lift 2in Body lift 35in Pro Comp X-Terrains
Top
Posts: 183
Joined: Wed Nov 12, 2003 4:52 pm
Location: Brisbane

Post by Tooheys »

Crossmember should be in the same place as fifth gear is behind where the crossmember bolts to. would be similar conversion as a 5 speed into a HJ47.

For the hand brake drum just use HJ75 backing plates and try and get them complete with all the levers and springs. Also try and get the tab off the rear diff that the handbrake mounts too or make something similar. Then just use a BJ42 5 speed handbrake cable. I think the part number is 46410-60121, just make sure its for a bj42 5 speed.
If at first you dont succeed.......get a bigger HAMMER!!!
Top
Posts: 4
Joined: Wed Mar 07, 2007 10:21 am

Post by tuf47s »

DONE THIS TO MY 47S .GOT THE BACKIN PLATES OUT AND MOUNTS ECT OUT OF A 60S FROM WRECKERS AND GOT A CABLE MADE UP FOR $100 I THINK ALL UP COST ME ABOUT $170......60 SERIES 75 SERIES HANDBRAKE WILL WORK.HAND BRAKE WORK IN REVERSE NOW DOSENT MATTER WHAT I DONE IT ALLWAYS ROLLED BACKWARDS.
Top
Posts: 4
Joined: Wed Mar 07, 2007 10:21 am

Post by tuf47s »

the gross member on myn is in the same place to.only mod i had to do was the gear lever is a couple inch back.made up new floor cover.welded bracket on diff.really easy to do.my 5 speed come out of a 60s thats why the gear lever is diffrent. the bjs 5 speed isnt any diffrent in gear lever postion.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 65 guests