Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Dyno day: results

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 47
Joined: Tue Jan 23, 2007 4:46 pm

Post by luxtce »

I haven't seen a big dyno graph on this forum!!!

Bring it on

Do I need to producea 2.5l WRX engines going over 300 atw, more like 370 kw plus at the fly......

:twisted:
Posts: 47
Joined: Tue Jan 23, 2007 4:46 pm

Post by luxtce »

Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

luxtce wrote:I haven't seen a big dyno graph on this forum!!!

Bring it on

Do I need to producea 2.5l WRX engines going over 300 atw, more like 370 kw plus at the fly......
Never seen a diesel WRX.... Also I think you have the wrong type of 4wd forum.
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Post by Dzltec »

Date has been set to the Saturday 24th March. Starting at 9am and finishing roughly around 3pm. Approx 20-25 car spots.

Costs are $50, prebookings can be done to ensure a definate time slot, no pay no dyno. This gets you 3 power runs and a speedo accuracy report, drivers can sit in the passenger seat when the vehicle is being run up if necessary.

Refreshments available, including bbq and cold drinks, all profits from this go to the rch good friday appeal.

This dyno day is an open day for us, showing what we can to the diesel vehicle, more about seeing what people have, what mods they have done and being able to make comparisons, not really a horsepower heroes day. In the end someone has to have the highest figure. All figures will be tabled and on display on the day and also on here.

A disclaimer form has to be signed, any vehicle can go on, but we are really looking at the 4wd guys and girls. To make it fair on everyone, any vehicle that is trailered will not be in the running for any prizes.

All owners are responsible for making sure cars are fit to run on the dyno, ie oil and water levels, good tyres and at correct pressure.

Prizes will be announced soon, as well as some display vehicles.

Poor behaviour will not be tolerated.


Thanks

Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Dzltec wrote:Costs are $50, prebookings can be done to ensure a definate time slot, no pay no dyno. This gets you 3 power runs and a speedo accuracy report, drivers can sit in the passenger seat when the vehicle is being run up if necessary.
sounds good.. how and where to book?
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

do you need to run road tyres? (my truck isn't my daily driver so it stays on the pedes).
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Post by Dzltec »

You can call me during work hours on 03 9739 5031, ask for Andy. The time allocation will be 1st come 1st to choose. Payment can be made on the day cash or card, prepaid over the phone, by direct deposit or come in and see us at Factory 10 East court, Lilydale industrial park, 38e2 is the Melways. We accept cheques, but they must clear before the dyno day.


We have a disclaimer form almost ready, this hopefully will be downloadable from our website very soon. This must be signed and produced on the day. Forms will be also available on the day.


You can use any tyres you wish. Road going tyres do require less power to drive them than chunky off road tyres.

Any further questions please ask here all call me.

Thanks

Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

sounds good to me, if i am not broken after navnite, i will be there :D
Gq ute new built
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

hottiemonster wrote:sounds good to me, if i am not broken after navnite, i will be there :D
I tried callin 2-3 times :( Andy is a busy man!
wanted to book car in for some work while at it..
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Got onto him today.

Booked in for Wed Next week..

I tink ya need a toonup..
(c) Dice
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

So, is anyone going?
Posts: 230
Joined: Wed Jun 21, 2006 7:38 pm

Post by kinglakekustoms »

yeah we hopefully should be there with the lux and a mq just gota give him a call and book .

so any one else going to be there
Big thanks to Northern Suburbs Radiators and Melbourne Drive Shafts and Balancing for all your help and support.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

kinglakekustoms wrote:yeah we hopefully should be there with the lux and a mq just gota give him a call and book .

so any one else going to be there
Mines in getting turbo and exhaust as we speak :)
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Post by Dzltec »

At the moment its a day for all 4x4s. If there is enough interest from everyone then we can run seperate days.

Further info will be announce early next week.

Thanks

Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Dzltec wrote:At the moment its a day for all 4x4s. If there is enough interest from everyone then we can run seperate days.

Further info will be announce early next week.

Thanks

Andy
Im BBQ boy.. I need one of them smock things with bit norks on it :D
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Post by Dzltec »

Well no one has made a pre booking as such, just a lot of yes Ill be there. Its going ahead even if 3 people show up.

There will be 4 awards, highest power petrol and diesel, lowest power of all and a Diesel-Tec award for the most intriguing vehicle.

We will have a few vehicles on display, including a ball bearing upgraded td42t ute. Hopeing to have my shorty with a set of twins up and running by the day.

Im loooking forward to meeting some faces and seeing what other people have done to their vehicles. Should make for an interesting day.

Any questions please call or pm me.

Thanks

Andy 03 9739 5031
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Post by Dzltec »

Thought I would give this a little bump with 200.6 rwkw patrol we did last week. It was detuned to 163rwkw after we ran these figures.

I am working like mad to have my shorty patrol with a set of twins on and running by saturday.

Looking forward to meeting everyone.


Thanks

Andy

PS can anyone host another dyno sheet for me?[/img]
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Image
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

anyone else turning up for this?? I might not be able to at this stage.. wont know till friday. :(
Posts: 10
Joined: Tue Mar 06, 2007 10:03 am
Location: Brisbane.. lost n found

Post by ROLOVR »

Andy, can we spectate on dyno day? are you only allowing drivers and passengers or can we come for a look too? :D
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Post by Dzltec »

Anyone is welcome to come and have a look. The more the merrier.


Thanks

Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Posts: 1006
Joined: Wed Jan 07, 2004 8:25 pm
Location: Strapped into the Evil!

Post by BIg StEvE »

Dzltec wrote:Anyone is welcome to come and have a look. The more the merrier.


Thanks

Andy
Id love to come down and have a run on the dyno. My garrett roller bearing turbo setup has yet to be dynoed so im pretty keen.
What time are u sticking around till on sat arvo?

EDIT :Ah 3pm my bad!
Posts: 1006
Joined: Wed Jan 07, 2004 8:25 pm
Location: Strapped into the Evil!

Post by BIg StEvE »

So whos going? Either to watch or run?
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

I'm going to try and get there after I finish work at 1pm, for a look.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Posts: 175
Joined: Mon Apr 12, 2004 7:56 pm
Location: Norway

Post by vn15 »

Dzltec wrote:Thought I would give this a little bump with 200.6 rwkw patrol we did last week. It was detuned to 163rwkw after we ran these figures.

I am working like mad to have my shorty patrol with a set of twins on and running by saturday.

Looking forward to meeting everyone.


Thanks

Andy

PS can anyone host another dyno sheet for me?[/img]
A 270 rwhp TD42 :cool: , any details on the mods, turbo set-up etc..???????
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Post by Dzltec »

Well I was a little disapointed at lack of numbers to show for dyno runs, but considering we had lot of rain friday night and saturday morning, most seem to be out with their toys in the mud.

We had a total of 5 cars go on the dyno.

Wally and his 80 series big block ute was there at 9am ready to go. I then put my shorty on while waiting but kept on blowing boost hoses off. Travis came with his gq and then followed by Stephen and his gq. Quite a few spectators looking at our display cars which included last years outback winner, Rohan Canavans 6l supercharged gq. Rohan was kind enough to leave me the keys and say if I wanted to run it up, then I can. Well it did get run up, its a torque monster.

There isnt a unique prize as all vehicles had something different, but all 3 people will receive the following prize of follow up dyno runs valid for a year from the dyno day date. This is to allow them to test any mods they have done since their runs. 3 runs are available free of charge (normal value $88).

Wally made 172.5 rwkw and 475.7 nm torque.
Stephen 93.8 and 398.9.
Travis 91.4 and 364.7.
Dieseltec 177 and 854.

More to follow with this. It now has a boost level between 48-55psi.

To everyone who came thankyou very much, another will be planned later this year, unless a club would like to hold a day.

Thanks

Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

Come on whats the figures that Rohans car pulled.
THOUGHT FOR THE DAY....
Posts: 1101
Joined: Mon Feb 21, 2005 7:12 pm
Location: Gold Coast/Ormeau

Post by scottmcguinness172 »

is there a dyno day in brissy does anyone know
1992 Dual Cab 80 series cruiser Factory Turbo 35"mtz's 5" Lift, Rear Locker
Team Blue Dog Off Road
Posts: 1006
Joined: Wed Jan 07, 2004 8:25 pm
Location: Strapped into the Evil!

Post by BIg StEvE »

turps wrote:Come on whats the figures that Rohans car pulled.
Surprisingly not as much as i thought it would. Pretty sure it runs an auto box etc so some losses there. Was good to watch thou! ;)
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Post by Dzltec »

After telling Rohan that we ran his car he asked what it pulled and what boost it ran. It was down on boost pressure from a pevious dyno session on the same brand dyno. It made 155rwkw with 37" tyres on our, it its a manual.

It did say it dynoed a lot higher.

Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Post Reply

Who is online

Users browsing this forum: No registered users and 52 guests