only have one bloody key for the new hungy... has anyone used mr minit type ppl to cut transponder keys before? any good? and what about getting a new fob for the central locking... has anyone had to do this before and how did you go about it?
i just know it will be exxy if i go to the dealer....
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
transponder keys for 100 series..
Moderators: toaddog, Elmo, DUDELUX
transponder keys for 100 series..
Fat people are harder to kidnap....
what ever you do don't go to mister minit. go to a locksmith to get the keys cut. You will need to get the ksy from toyota, they will send you to a locky to get th key cut, once thats done you go back to toyota and pay lots and lots of money and they program the key's code for you.
I'm not sure what toyota charge, I know all the lexus keys we cut at work cost well over 200, subaru charge around 160, holden are a bit cheaper at about 130.
expect to pay up around 200 I'd say.
Tom
I'm not sure what toyota charge, I know all the lexus keys we cut at work cost well over 200, subaru charge around 160, holden are a bit cheaper at about 130.
expect to pay up around 200 I'd say.
Tom
With the key as long as you have the master key and not the slave normal locksmith can cut the key and program it. With the fob just buy another one from toyota then follow this procedure to program it:
unlock car jump in dont close door.
lock and unlock door with original fob.
quickly put key in ignition and turn from acc to on to acc 20 times quickly
remove key once you hit 20 hazard lights should then flash 20 times.
once it has stopped flashing hit lock then unlock on old fob.
then hit lock unlock on new fob.
new fob should be programmed.
been awhile since I've done this so 20 might not be the magic number but thats the procedure I got taught be a locksmith.
Tooheys
unlock car jump in dont close door.
lock and unlock door with original fob.
quickly put key in ignition and turn from acc to on to acc 20 times quickly
remove key once you hit 20 hazard lights should then flash 20 times.
once it has stopped flashing hit lock then unlock on old fob.
then hit lock unlock on new fob.
new fob should be programmed.
been awhile since I've done this so 20 might not be the magic number but thats the procedure I got taught be a locksmith.
Tooheys
If at first you dont succeed.......get a bigger HAMMER!!!
Who is online
Users browsing this forum: No registered users and 6 guests