sierra 1600 conversion..
1300 starter, grinded abit off the side where it rubs on block, put it in, 3 days later it started making noises starting.. soon enough it didnt start, took it out, grindinded more off put it back in same problem...
starter must be stuffed...
do i buy a vitara starter... or reco my sierra one.....
if i buy a 1.6 starter will i need to grind it at all ? or will it bolt up straight...
Any help about this would be great...
Dan!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Starter motor
dont know how much this will help you but i got an old sierra starter and a new swift one of Nicbeer and swapped the internals from the newer swift motor into the sierra housing.. worked a treat.
HTH
HTH
2" Susp lift, Ext shackles, RTC damper; Offsets, Custom interior panels, Stereo (+Sub), rubber Checkerplate floor, Custom Centre console, Under bonnet storage
Soon: Aircon + tinting?
Soon: Aircon + tinting?
How have u done the conversion between block+box
when u say didnt start- meaning no starter noise or noise but not turning motor over?
i would say go the 1.6 starter. there is 2 versions i think
Nic
when u say didnt start- meaning no starter noise or noise but not turning motor over?
i would say go the 1.6 starter. there is 2 versions i think
Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Who is online
Users browsing this forum: No registered users and 1 guest