Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

mq to mk rear bumpstops.... and bolt on rear disks...

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 336
Joined: Thu Aug 11, 2005 8:23 pm
Location: dromana, vic

mq to mk rear bumpstops.... and bolt on rear disks...

Post by dromana7411 »

iv read somewhere that it can be dont but tried a search and couldnt find anything....


any info on this would be good...

i also heard omeone mention about a bolt on rear disk conversion for them aswell... but havnt heard / seen anything since...

any info on this would be good aswell..

bryce-
Top
User avatar
V8Patrol
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

Check out 'Dr Frankenstien' members thread, he has the rear disc conversion listed in it.

its either in this thread ......
http://www.outerlimits4x4.com/viewtopic.php?t=10553

or this thread .....
http://www.outerlimits4x4.com/viewtopic.php?t=45767

Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Top
Posts: 336
Joined: Thu Aug 11, 2005 8:23 pm
Location: dromana, vic

Post by dromana7411 »

thanks for that...


anyone know about the bumpstops?|??
Top
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Contact:
Contact macca81

Post by macca81 »

i know te top leaf sits on my bumpstops.... this is normal for a mq right ??
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Top
Posts: 487
Joined: Wed Dec 06, 2006 10:31 pm
Location: latrobe valley/vic

Post by Wish I had coils »

[quote="macca81"]i know te top leaf sits on my bumpstops.... this is normal for a mq right



NO!!!!!!!
Top
Posts: 4792
Joined: Sun Nov 21, 2004 9:05 pm
Location: Watching out for stray buses

Post by Brendan-s »

Thats the sign of a very sagged leaf pack!
Top
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Contact:
Contact macca81

Post by macca81 »

but the rest ov my pack is fine, its just the one top one that curls up away from the pack... :D
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Top
Posts: 215
Joined: Sat Aug 30, 2003 4:26 pm
Location: The Alice/Adelaide

Contact:
Contact Vanne

Post by Vanne »

HELL no it shouldent be sitting on the bump stop.

That also reminds me? why do some MQ/MK only have about 3-4 leafs, while mine has 8 on each leaf in the rear and 6 at the front?
85 MK lwb 3.3td 2 inch body lift, 32inch simex Ironman 2 inch suspension lift. 4 tonne on the clock, original donk.
Top
Posts: 223
Joined: Sat Feb 03, 2007 9:44 pm
Location: South Frankston, Melbourne

Post by maccasMQ »

because some have parabolic leaf springs and some dont. Parabolic leafs are all the same length eye to eye. So there is only need for a few leafs.
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

some mq/mk patrols have over ride springs these have there own bump stops n are only about 500mm long but there is a bumpstop that it above the axle tube this is the main bump stop
Top
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Contact:
Contact macca81

Post by macca81 »

nastyroll thats wot i got, rear of leaf sits on a bumbstop tho there is still a main one directly over the axle. bad pics i know, but its only off my phone


Image
this shows both the leaf bumpstop and the axle bumpstop

Image
this is the lone bumpstop

Image
this shows a piece of metal that has been bolted to chassie where the leaf rises up to, same on other side and same on a mates mq, so i presume its stock...
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 4 guests