I think it is stretched and skips teeth on the gears........
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Transfer case
Moderator: -Scott-
Transfer case
I need a transfer case for an early model pajero. Doesn't have to be in awesome condition, I just really need the chain from it as mine is stretched and making some shocking noises.
I think it is stretched and skips teeth on the gears........
Cheers
I think it is stretched and skips teeth on the gears........
Cheers
If Tom could go all night on a glass of milk,
Imagine what I can do after a bottle of rum!!
Imagine what I can do after a bottle of rum!!
Hmmmm, not a massively uncommon problem for high km early Jabbers.
I have a spare super select chain but that won't fit unfortunately.
If your doing the case yourself pay careful attention to the output shaft main bearing (they usually cark it if the chain is stretched and starts jumping). Output shaft end float is also very important as is shimming up the main chain cogs.
If you need some advice just ask.
We have pulled apart and rebuilt 3 of these cases they are a fairly simple set up, a super select case is way more complicated with the centre diff etc. Pretty much your looking at a total dismantle and rebuild with a new chain if it hasn't done major damage.
If the case is cactus don't chuck it there are a few bits I need I will buy off you. The skipping chain sounds like a metallic twang (like running a steel ruler through the spokes of a bike).
Frank.
I have a spare super select chain but that won't fit unfortunately.
If your doing the case yourself pay careful attention to the output shaft main bearing (they usually cark it if the chain is stretched and starts jumping). Output shaft end float is also very important as is shimming up the main chain cogs.
If you need some advice just ask.
We have pulled apart and rebuilt 3 of these cases they are a fairly simple set up, a super select case is way more complicated with the centre diff etc. Pretty much your looking at a total dismantle and rebuild with a new chain if it hasn't done major damage.
If the case is cactus don't chuck it there are a few bits I need I will buy off you. The skipping chain sounds like a metallic twang (like running a steel ruler through the spokes of a bike).
Frank.
I just luv my "clacker Jabber"
Who is online
Users browsing this forum: No registered users and 31 guests