Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

UHF Selection - Comments?

For all things Electrical.

Moderator: -Scott-

Post Reply
Posts: 98
Joined: Thu Sep 21, 2006 4:14 pm
Location: Jabiru

UHF Selection - Comments?

Post by danos »

Hi

Im looking at getting my first UHF radio and this is what I have in mind:

Uniden UH088SX DIN Size UHF Radio
RFI CD900 Rugged 6.5db Antenna

I live in the NT and it would most prob only used for convoy trips. I was planning to mount the aerial on my bullbar and tap into the cd players power source.

Was also thinking of getting a cheap handheld later in the year..

Any Cons to this setup?

Thanks
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

GME radios are better. :D

You did ask for opinions...
Posts: 25
Joined: Sun Oct 15, 2006 10:28 am

Post by topend-yobbo »

GME 4400 and a good GME aerial = no dramas.
Posts: 98
Joined: Thu Sep 21, 2006 4:14 pm
Location: Jabiru

Post by danos »

Why is GME better?

Clarity, strength, durability?
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

danos wrote:Why is GME better?

Clarity, strength, durability?
Australian made...

In side by side testing the GMEs typically reach further than Unidens, and produce better clarity at their limit. (I think Kenwood and Icom are better again, but I think they're also more expensive.)

For typical convoy work, the difference isn't an issue - both have sufficient range for club use. If you can't reach somebody, go look for them - or wait for them to come look for you.

Go with the one you like the most.
Posts: 98
Joined: Thu Sep 21, 2006 4:14 pm
Location: Jabiru

Post by danos »

Yep I figured as much.

Thanks
Posts: 848
Joined: Fri Apr 02, 2004 12:01 pm
Location: Central Victoria

Re: UHF Selection - Comments?

Post by Patroler »

danos wrote:Hi

Im looking at getting my first UHF radio and this is what I have in mind:

Uniden UH088SX DIN Size UHF Radio
RFI CD900 Rugged 6.5db Antenna

I live in the NT and it would most prob only used for convoy trips. I was planning to mount the aerial on my bullbar and tap into the cd players power source.

Was also thinking of getting a cheap handheld later in the year..

Any Cons to this setup?

Thanks
You may blow fuses, depends on how good the wiring and fuses are? I guess you probobly aren't going to be transmitting when the cd player is at full volume so it may be all right, trial and error.
Also make sure you get a good earth - ive heard of people using the radios earth, finding it with a multimeter when the headlights are off and accidentally tapping into the lighting wire as it would have 0 volts, turn the lights on and you have dramas!
Good luck
There are no stupid questions, but there are a LOT of inquisitive idiots
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

RFI CD900 are an excellent antenna. Very strong and good signal. Highly recommended!!!
KRiS
Posts: 98
Joined: Thu Sep 21, 2006 4:14 pm
Location: Jabiru

Re: UHF Selection - Comments?

Post by danos »

Patroler wrote:
You may blow fuses, depends on how good the wiring and fuses are? I guess you probobly aren't going to be transmitting when the cd player is at full volume so it may be all right, trial and error.
Also make sure you get a good earth - ive heard of people using the radios earth, finding it with a multimeter when the headlights are off and accidentally tapping into the lighting wire as it would have 0 volts, turn the lights on and you have dramas!
Good luck
I have also read about tapping into the ciggy lighter wires. Would this be a better option?
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests