I'm in the process of applying for approval for my bodylift and the paperwork requires a list of ADR's stamped on my compliance plate.
But there are none.
Unless I can't see a third plate there are no ADR's stamped onto the two plates I can see. Does anyone else have a third plate other then a mod plate or know appropiate ADR's. My Sierra is plated as being manufactured 10 - 95.
Greg
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Compliance Plate ADR's
adr PLATE
my 89 SWB WT Sierra has an alloy plate on the top of the firewall directly in front of the driver. It says:
THIS VEHICLE WAS MANUFACTURED BY THE SUZUKI MOTOR COMPANY HAMAMATSU JAPAN TO COMPLY WITH AUSTRALIAN DESIGN RULES,
1,2,3,4C,5B,6,7,8,11,12,14,15,16,18,20,22A,23B,24A,25A,28A,35A,40,43/01
SUZUKI SIERRA D UTE 1.3 SJ50 4/89 GVM 1340KG
VIN: JSAXXXXXXXXXXXXXX
MY plate is easy to read but if it were corroded or painted over you could have trouble seeing the feint stamping.
THIS VEHICLE WAS MANUFACTURED BY THE SUZUKI MOTOR COMPANY HAMAMATSU JAPAN TO COMPLY WITH AUSTRALIAN DESIGN RULES,
1,2,3,4C,5B,6,7,8,11,12,14,15,16,18,20,22A,23B,24A,25A,28A,35A,40,43/01
SUZUKI SIERRA D UTE 1.3 SJ50 4/89 GVM 1340KG
VIN: JSAXXXXXXXXXXXXXX
MY plate is easy to read but if it were corroded or painted over you could have trouble seeing the feint stamping.
Who is online
Users browsing this forum: Bing [Bot] and 1 guest