Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Cost estimate for coils and diffs
Moderators: toaddog, Elmo, DUDELUX
Cost estimate for coils and diffs
Hmmm I have a duel cab and thinking of putting landcruiser or patrol diffs in with coils all round and some bad ass shocks. Just want stronger, wider, rear disks, travel. Can anybody give me some costs for second hand. All ready have high steer, will this fit to other diffs(wider)? Can you get late model diffs with 4.88?
ANGLOMOIL Superior Lubricants
http://www.hypoformance.com.au/#/page/61eb/about-us/
http://www.precisionautomatics.com.au/
http://www.hypoformance.com.au/#/page/61eb/about-us/
http://www.precisionautomatics.com.au/
Its in the ball park. I am also considering coilovers if the price is right. I would like to think I can compete at some stage, and would like to do it right from the start. I’m banking on getting 4.88’s because my 4 pot wont turn anything lower, otherwise i’ll be doing v8 first. I like where professor took his.
ANGLOMOIL Superior Lubricants
http://www.hypoformance.com.au/#/page/61eb/about-us/
http://www.precisionautomatics.com.au/
http://www.hypoformance.com.au/#/page/61eb/about-us/
http://www.precisionautomatics.com.au/
what were you pricing, a 5link or something?G_loomis wrote:I was looking at doing the same to my 60 series...after getting prices for just the basic items needed I was up to about $3500-$4000 straight up.
Then there comes the cost (if you cant do it yourself) of getting it all converted.
cause i rekon you could get all 80 series OEM components pretty cheap froma wreck.
GQ kinda setup, someone doing all the work prolly around $6G at mates rates... my list of shit;
GQ of course
diffs 800
rebuilding diffs 500
rear sus 700
front sus 1000 (panhard adds alot as im using adjustable)
steering may need to be changed depending on what you have.
driveshafts 600 (as i need new ones)
plus moving rear fuel tank, steel and a few other small things i cant think of atm.
so ive spent atleast (ive changed a few times, sold things bought things so its only roughly)
$3G doing it all myself as a guide and ive spent more than that
GQ of course
diffs 800
rebuilding diffs 500
rear sus 700
front sus 1000 (panhard adds alot as im using adjustable)
steering may need to be changed depending on what you have.
driveshafts 600 (as i need new ones)
plus moving rear fuel tank, steel and a few other small things i cant think of atm.
so ive spent atleast (ive changed a few times, sold things bought things so its only roughly)
$3G doing it all myself as a guide and ive spent more than that
turbos are nice but i'd rather be blown
Chunderlicious is about right.
I put gq diffs under my lux
I spent 1000 on diffs, 600 rebuilding and a mate put them under my lux for 3000.
Drive shafts cost me 350 for rear and 250 for front.
But you will need the gq shafts and the lux shafts for that price.
You will need a bit more for things that pop up and 600 for engineering.
I also have changed a few things since, i am in the process of putting duel transfers and have had to change my shaft lengths again.
I put gq diffs under my lux
I spent 1000 on diffs, 600 rebuilding and a mate put them under my lux for 3000.
Drive shafts cost me 350 for rear and 250 for front.
But you will need the gq shafts and the lux shafts for that price.
You will need a bit more for things that pop up and 600 for engineering.
I also have changed a few things since, i am in the process of putting duel transfers and have had to change my shaft lengths again.
Thanks fellas. maitlandboy, when you said rebuild diffs, was that to change ratio, or were they stuffed.
ANGLOMOIL Superior Lubricants
http://www.hypoformance.com.au/#/page/61eb/about-us/
http://www.precisionautomatics.com.au/
http://www.hypoformance.com.au/#/page/61eb/about-us/
http://www.precisionautomatics.com.au/
yeah happened to me, thanks bowlseymaitlandboy wrote:as chunderlicious said saftey issues, one of my rear axles was stuffed.
A nd while ther out make them like new.
Replace all seals and bearings, and check your centres.
Make sure your front ratios are the same as your rear ratios, sound stupid.
turbos are nice but i'd rather be blown
Just go 80s front and GQ rear as you can get 4.88 gears for both of them and the nissan rear will give you a center pinion out put.
I have just done this to a zook and the rear diff cost about $2,500 thats 4.88 gears and ARB locker complete.It is running coil overs and custom link set up.
You could run the standard 80s front arms with coil overs with X link and A frame or 4 link the rear with coil overs
With the 80s front diff you can get crome moly CVs for it and the 80s come with better brakes and steering lock then the Hilux diffs and you could just put a 4.88 hilux center in it as it will save you some cash but you will lose the Hi pinion.
Just a thought Garth Rustys Fabworx
I have just done this to a zook and the rear diff cost about $2,500 thats 4.88 gears and ARB locker complete.It is running coil overs and custom link set up.
You could run the standard 80s front arms with coil overs with X link and A frame or 4 link the rear with coil overs
With the 80s front diff you can get crome moly CVs for it and the 80s come with better brakes and steering lock then the Hilux diffs and you could just put a 4.88 hilux center in it as it will save you some cash but you will lose the Hi pinion.
Just a thought Garth Rustys Fabworx
good info thanks, one thing that still trying to work out, just plain coils, coil over, or air shocks. Trying to work out what will suit truck weight, and use. But man leafs are good, just saw video. I'M
CONFUSED!!
CONFUSED!!
ANGLOMOIL Superior Lubricants
http://www.hypoformance.com.au/#/page/61eb/about-us/
http://www.precisionautomatics.com.au/
http://www.hypoformance.com.au/#/page/61eb/about-us/
http://www.precisionautomatics.com.au/
Banned
Lukes 4x4 customs
http://s31.photobucket.com/albums/c366/nissota/luxy/
PM me if you want his number (The guy that built it) He'll also be at Tuffy's if you're going.....
http://s31.photobucket.com/albums/c366/nissota/luxy/
PM me if you want his number (The guy that built it) He'll also be at Tuffy's if you're going.....
[color=yellow]I don't know about Phil, but if I had 15 guys following me around all day, I reckon I'd fell like a cigarette! [/color]
Pest Control (NSW) - PM for details
Pest Control (NSW) - PM for details
Who is online
Users browsing this forum: No registered users and 18 guests