Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Aux battery wire splitter

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 48
Joined: Wed May 25, 2005 10:08 am

Aux battery wire splitter

Post by superg »

Hi guys I have run a wire from my second battery to the rear of my car and now what i want to do is run some various plugs like an anderson, cigarette plug and maybe another plug of of this main wire to the rear.

What is the best way to do this, is there some sort of splitter or something where i can have the earth and power lead in and then a few different outlets where i can connect other wires for the different plugs? thanks
Top
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

get a fuse panel out of an old car at the wreckers or see an auto shop, they will sell them there too.
Top
Posts: 561
Joined: Tue Jan 04, 2005 2:25 pm
Location: Melbourne

Post by Cossie »

plenty of 12v distribution blocks available, this type of thing: http://www.advanceae.com.au/catalog/ind ... 36f75126b3

places like jaycar maybe?
The hardest thing about owning a jeep is telling your parents you're g a y!!
Top
Posts: 115
Joined: Mon Jan 01, 2007 9:06 am

Post by Turbz »

I am also after something like this. You want to be able to run the battery lead in, and have a heap of outs.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

I think Pirhana have a fuse block that has 1 input and 4 fused outputs ?
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 48
Joined: Wed May 25, 2005 10:08 am

Post by superg »

Do i need to run a positive and negative wire to the fuse block?
Top
Posts: 558
Joined: Sat Dec 11, 2004 4:38 pm
Location: Gold Coast

Contact:
Contact drivesafe

Post by drivesafe »

Hi superg, in automotive use, you only need the positive.

The reason I state “ automotive use “ is because there are quiet a few different types of fuse blocks on the market and some of them have a negative bus bar but this is there because this type of fuse block is designed for marine use.

Many marine devices work well in automotive use and if you have one and have no reason to use the negative bus bar, just ignore it.

Cheers
2007 TDV8 Range Rover Lux
2009 2.7 Discovery 4
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 0 guests