mate just got a lock rite (or similar) for then front. Problem is his center has 2 spider gears not 4. Anyone know the reasoning of this? Did only certain models come out with these? The locker wont fit in.
Any help would be great, cheers Julian[/b]
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
sierra diff trouble - front locker
sierra diff trouble - front locker
[color=red][size=150][b]CTRL + W[/b][/size][/color]
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
Re: sierra diff trouble - front locker
GQ4.8coilcab wrote:mate just got a lock rite (or similar) for then front. Problem is his center has 2 spider gears not 4. Anyone know the reasoning of this? Did only certain models come out with these? The locker wont fit in.
Any help would be great, cheers Julian[/b]
Normal. From memory the WT (88 on) had a 2 pin carrier. Just swap a 4 pin in, using the front side gears so the axles still fit.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
ronoor wrote:thanks for the post gq4.8coilcab as he said its a 91 wt 41teeth on the crown wheel do i need a early diff centre with my crown wheel. cheers ron
You will need to swap your current crown-wheel to a 4-pin carrier, and swap in front diff side gears to match your current inner axle spline. Front and rear axles have different spline count, so you need to match the side gears respectivley.
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
You will need to swap the crownwheel to ensure that the front ratio matches the rear one. I'm not sure what rig you have, so you will have to work it out. Best bet is to swap your current cownwheel to you donor carrier. That way you keep the same ratio, as well as a matching crownwheel and pinion. You shouldn't mix crown wheel and pinion gears, as they are usually wear matched to each other.
Layto....
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Who is online
Users browsing this forum: No registered users and 3 guests