Hey
Anyone know if the powersteering outta a 1997 Coily Samurai will fit into a 85 Sierra, and what bits you need to swap over? is it all just bolt on?
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
powersteering from coily sammurai into sierra
Samurai power Sierra
Samurais are U.S issue and are left hand drive. Sierra's went to the civilised world as right hand drive. I don't think any model Samurai box will be any good unless you want to move the steering to the other side of the car.
over here in New Zealand we have the:
SJ410, SJ413, SJ413-Samurai, Samurai and late model Samurai (coily) and their all RHD + we have some sierras/early jimnys that found their way here...
this is a RHD coily samurai someone is wrecking... (power steering)
another (not wrecking)
may be the same as the coily sierra's?
SJ410, SJ413, SJ413-Samurai, Samurai and late model Samurai (coily) and their all RHD + we have some sierras/early jimnys that found their way here...
this is a RHD coily samurai someone is wrecking... (power steering)
another (not wrecking)
may be the same as the coily sierra's?
Chris
Samurai/Sierra steer
Looks same to me. U.S didn't get coily's so I'd say its the same as Aussie version.
Posts: 396
Joined: Fri Dec 24, 2004 4:05 pm
Joined: Fri Dec 24, 2004 4:05 pm
Location: in the shed cutting/grinding/welding mocks old shit vic
they are exactly the same car. it was just badged a sierra in OZ (the only market to have so) 'cause they didn't get the Ford version
and yes the steering will fit. in OZ we didn't get power steer in the coily, but in NZ that was an option (something to do with all the imports at the time)
Mitch
and yes the steering will fit. in OZ we didn't get power steer in the coily, but in NZ that was an option (something to do with all the imports at the time)
Mitch
[quote="Gwagensteve"]
nope, apparently I hate suzukis so nobody should be surprised by that :roll:
Steve,[/quote]
[url=http://vic.suzuki4wd.com/]Suzuki 4WD club VIC[/url]
nope, apparently I hate suzukis so nobody should be surprised by that :roll:
Steve,[/quote]
[url=http://vic.suzuki4wd.com/]Suzuki 4WD club VIC[/url]
That should be it.
If your car is EFI, you probably have an idle up for power steering (vitara's do) There should be a terminal in the loom down near the oil pressure switch that needs to be plugged in to the pump. This will help stop the engine stalling when you are steering at idle.
Steve.
If your car is EFI, you probably have an idle up for power steering (vitara's do) There should be a terminal in the loom down near the oil pressure switch that needs to be plugged in to the pump. This will help stop the engine stalling when you are steering at idle.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 28 guests