just wondering i have a 3.0td hilux with a 2.5 exhaust from the cat back just so i can get the turbo sound really .
but i wanna know will is make any diffenerence getting another one but direct from the turbo? i have heard from other posts your turbo spools quicker and exhausts temps get a bit lower .... is it worth the money? i only have a factory turbo with no plans of upgrading. any info would be a big help
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hilux exhaust ??????????????????????????????
Moderators: toaddog, Elmo, DUDELUX
hilux exhaust ??????????????????????????????
Email - flossamarosus@hotmail.com
exhaust
I had A 04 3.0TD hilux with a 2.5 inch from the turbo all the way back, you get the whistle when under throttle, but found it to be a bit to loud on the longer trips. Does also help with the fuel econamy a touch as the exhaust gases are escaping quicker I spose. Gazza!
Gazza the Chippy
You will find that a 3.0TD doesn't have a cat.
Run a 3" dump straight from the back of the turbo.(Make a new flange or I have one $40)
Follow with 3" half the length of the exhaust with a 3" flex joint installed.
From 3" go into a offset straight through mufler and exit 2.5" to the end.
Make all mandrel
All good.Not to loud.
Did run a straight through muffler but drone a bit.Offset fixed it up.
Cheers
Dazza
Run a 3" dump straight from the back of the turbo.(Make a new flange or I have one $40)
Follow with 3" half the length of the exhaust with a 3" flex joint installed.
From 3" go into a offset straight through mufler and exit 2.5" to the end.
Make all mandrel
All good.Not to loud.
Did run a straight through muffler but drone a bit.Offset fixed it up.
Cheers
Dazza
I run this exact same setup on my 2.8 Lux with turbo except mine is 3" all the way.Hales231271 wrote:You will find that a 3.0TD doesn't have a cat.
Run a 3" dump straight from the back of the turbo.(Make a new flange or I have one $40)
Follow with 3" half the length of the exhaust with a 3" flex joint installed.
From 3" go into a offset straight through mufler and exit 2.5" to the end.
Make all mandrel
All good.Not to loud.
Did run a straight through muffler but drone a bit.Offset fixed it up.
Cheers
Dazza
Almost as quiet as a standard non turbo lux but sounds like a truck when you give it a good boot full
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
www.teamcarnage.net
Who is online
Users browsing this forum: No registered users and 0 guests