Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Jumping out of low range?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Jumping out of low range?

Post by chunks »

Hey fellas,

My 60 has a bad habit of popping out of low range, usually at the most inconvenient (and potentially dangerous) times. Is this a common problem? It has 280k on the clock now so things might be getting a bit worn.

Cheers,
Bill.
Top
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Contact:
Contact joel HJ60

Post by joel HJ60 »

Checked oil lately? Could shit in the oil cause this? Maybe detents?
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Top
Posts: 1715
Joined: Tue Sep 06, 2005 8:38 pm
Location: at my wits end

Post by RED60 »

LR lever hitting side of hole in transmission hump. Cause.... body lift reducing normal clearance....broken gbox/engine mount causing more movement than normal................ the fix... bend the lever to get more clearance..... replace broken mount/s..... :D :D
Show me the money..SHOW ME THE MONEY
Top
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

The oil is fine and the vehicle doesn't have a body lift.
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

agree with red60, mine was going that, and the linkage that holds the lever in 4wd high and low had mooved....allowing the low lever to pop forward and out of 4wlow
Top
Posts: 12
Joined: Tue Mar 07, 2006 2:16 pm
Location: central Vic

Post by StuartL »

I have had the same problem with my 80 series, It started a few years back when I went to put it into high four doing about thirty k's and it went straight into low, without thinking I let the clutch out and it nearly threw us out the windscreen, since then I have had a reco transfer case put in and it still does it under load, but after reading this thread, I think that the lever may have bent on the particular day in question :roll:
Top
Posts: 3
Joined: Sun Mar 25, 2007 7:25 pm

Post by misunderstood »

not all too sure but i think i remember someone mentioning something similar to this problem and relating it back to a cracked/damaged engine mount.
Top
Kon
Posts: 23
Joined: Mon Nov 21, 2005 3:54 pm
Location: Scarboro WA

Post by Kon »

yep its the engine mount!

mine was doing this a few months ago, was driving me insane!!
I was told to check the engine mounts, sure enough 2 were stuffed, replaced them, havent had a problem since.

easy to do aswell...

Good luck
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest