Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rangie UTE build - Kit fom LRA

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Rangie UTE build - Kit fom LRA

Post by mickrangie »

Picked it up yesterday will take some pics tonight of it.... as I have this week off i'll start stripping the old girl....

Mick
Last edited by mickrangie on Sat Apr 07, 2007 5:42 pm, edited 2 times in total.
TD5 96 Discovery UTE.
Top
Posts: 70
Joined: Tue Feb 13, 2007 9:19 pm
Location: yallourn nth vic

Post by chrisl »

just wondering how much it was
cheers chris
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

chrisl wrote:just wondering how much it was
cheers chris
Only 2 kits were made and I got the impression it wont be done again. All i will say is it was around $1350 give or take...

Image

Image

will update pics as the build goes on...

Mick
TD5 96 Discovery UTE.
Top
Posts: 425
Joined: Sun Jan 16, 2005 10:42 pm
Location: Melbourne

Post by walker »

Picked up mine today. Nice kit.

Now I just have to work out how it goes together. :?
Thanks,

Adam
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

walker wrote:Picked up mine today. Nice kit.

Now I just have to work out how it goes together. :?
x2
TD5 96 Discovery UTE.
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

Day 2

Image

Image

Image

will start cutting tomorrow arvo once i have moved all the wires out of the way.

Mick
TD5 96 Discovery UTE.
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

Day3

Image

Ready to cut but i have to wait for engineer :( I also spent a few hours under the car disconnecting all the wires, brake line, air line etc that are attached to the body past the rear outriggers.

Image

Image

Image
All the bits fit!! Whoohoo!

Image

Image
Rivet anyone?

Image
All Done and apart form a Sika flex induced headache it was a productive day!


Image
Forsale :P :P


Image

Image
Rear 1/4 window ready for install.

I am out!!
Mick
TD5 96 Discovery UTE.
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

lazy day today finished stripping the other rear door and played around with the hood lining

Used the same principle as the roof basically i cut the sunroof hole out of the lining and joined the 2 pcs together.

Image

Image

Image

Mick
TD5 96 Discovery UTE.
Top
Posts: 21
Joined: Thu Feb 24, 2005 12:20 pm
Location: Brisbane

Post by b_mac »

I see some bastard stole the guard off your grinder, and your gloves too :cry: just hope they left you with the saftey mask.

I had a thin cutting disk disintegrate on me the other day. The guard directed the chunks onto the job and one chunk bounced up and hit my saftey glasses :oops: scary sh!t and lucky it didn't get me in the face ( I need to get a mask ).

Ute's looks cool ;)

Bruce.
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

b_mac wrote:I see some bastard stole the guard off your grinder, and your gloves too :cry: just hope they left you with the saftey mask.

I had a thin cutting disk disintegrate on me the other day. The guard directed the chunks onto the job and one chunk bounced up and hit my saftey glasses :oops: scary sh!t and lucky it didn't get me in the face ( I need to get a mask ).

Ute's looks cool ;)

Bruce.
Yeah i wear a full mask since i started using the thin discs as they explode very easy.... gloves are used most times but when i cut ally i don't bother... and the cover well yeah umm good fanks
TD5 96 Discovery UTE.
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

b_mac wrote:I see some bastard stole the guard off your grinder
Does anyone who actually uses a grinder keep the guard on??? I wouldn't be able to do 90% of the things I do with my grinder if I did that.

The only time I use a guard is when using the (suicudal) carbide-toothed blades for cutting ally.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

ISUZUROVER wrote:
b_mac wrote:I see some bastard stole the guard off your grinder
Does anyone who actually uses a grinder keep the guard on??? I wouldn't be able to do 90% of the things I do with my grinder if I did that.

The only time I use a guard is when using the (suicudal) carbide-toothed blades for cutting ally.
When i cut masonry stuff i use the guard (different grinder) as the bits that come off are like shards of glass!
TD5 96 Discovery UTE.
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

Day 5 well evening anyway

Hood Lining is finished

Image

Well all i can say is i'll never do that again! What a PITA!! I am happy with the outcome and all it cost me was 7 buks for a can of Spray and Stick glue....

Mick
TD5 96 Discovery UTE.
Top
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

Interesting read - keep up the posts, can't wait to see the outcome!
Nice gq swb ute chop with a huffer for the good times
Top
Posts: 2158
Joined: Sat Jan 20, 2007 8:16 am
Location: New Zealand

Post by KiwiBacon »

ISUZUROVER wrote:
b_mac wrote:I see some bastard stole the guard off your grinder
Does anyone who actually uses a grinder keep the guard on???
Yep, especially after reading the coroners report on the poor guy who didn't.
Grinder had a bigger wheel than it was supposed to, it exploded due to the higher speed, piece went through his sternum and into his heart.
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

KiwiBacon wrote:
ISUZUROVER wrote:
b_mac wrote:I see some bastard stole the guard off your grinder
Does anyone who actually uses a grinder keep the guard on???
Yep, especially after reading the coroners report on the poor guy who didn't.
Grinder had a bigger wheel than it was supposed to, it exploded due to the higher speed, piece went through his sternum and into his heart.
Great!!

well it all comes down to common sense
TD5 96 Discovery UTE.
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

Business time!!

Day 6

Image
going to be new c pillar.

Image
i'll need this later

Image
Almost!

Image

All done!! Where is my welder?


Forsale





Image :lol: :lol:

Meeting with engineer was good he is happy to engineer the whole car body lift, 33' tyres, Suspension lift, and Ute Tray back.

Mick
TD5 96 Discovery UTE.
Top
DL
Posts: 299
Joined: Wed May 31, 2006 8:33 pm
Location: Bellarine, Brackistan

Post by DL »

Hi Mick,

How big were the speakers you had up the back of the roof liner? Any issues? Looking for a place for a second pair of JBL's in mine.

cheers, DL
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

DL wrote:Hi Mick,

How big were the speakers you had up the back of the roof liner? Any issues? Looking for a place for a second pair of JBL's in mine.

cheers, DL
speakers are std 4" or what ever they are. Issues with what? Cause i have many personal ones :P

Mick
TD5 96 Discovery UTE.
Top
DL
Posts: 299
Joined: Wed May 31, 2006 8:33 pm
Location: Bellarine, Brackistan

Post by DL »

Hi Mick,

The weight of the speakers screwing up the headliner. Didn't know RR mounted speakers there as stock on later models. I've got an early headliner that would have disintegrated if I hadn't reinforced it. Looks like 6" aren't going to fit - then again I could actually get out the tape measure, open the tailgate and see!

cheers, DL
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

DL wrote:Hi Mick,

The weight of the speakers screwing up the headliner. Didn't know RR mounted speakers there as stock on later models. I've got an early headliner that would have disintegrated if I hadn't reinforced it. Looks like 6" aren't going to fit - then again I could actually get out the tape measure, open the tailgate and see!

cheers, DL
they don't screw in to the liner my model has brackets.
TD5 96 Discovery UTE.
Top
Posts: 640
Joined: Sat Dec 07, 2002 4:04 pm
Location: Snake Valley VIC

Post by Aquarangie »

mickrangie wrote:
they don't screw in to the liner my model has brackets.
Mine don't on the 87 Rangie, they screw up into the hooldlining. I have had the lining at the back almost fall down though (fixed this with some good 'ol tek screws :twisted: :twisted: :twisted: )

The ute at this stage of the build is looking the goods. You are more game than I am with the angle grinder :shock:

Trav
Last edited by Aquarangie on Thu Apr 05, 2007 4:18 pm, edited 1 time in total.
Land Rover- The Collingwood of 4WD's!!!!
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

Aquarangie wrote:
mickrangie wrote:
they don't screw in to the liner my model has brackets.
Mine don't on the 87 Rangie, they screw up into the hooldlining. I have had the lining at the back almost fall down though (fixed this with some good 'ol tek screws :twisted: :twisted: :twisted: )

The ute at this stage of the biuld is looking the goods. You ate more game than I am with the angle grinder :shock:

Trav
Don't worry it's hurting!! but i can see the end product and it's what i always wanted......
TD5 96 Discovery UTE.
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

Day 7

lots of grinding today :x

Image
C pillar before i attack

Image

I won!

Image

Where it should go.

Image

Rear roof brace

Mick
TD5 96 Discovery UTE.
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

Day 8 only 2.5 hours today :(

Image

Image

Image

MIcK
TD5 96 Discovery UTE.
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

Day 9

Both side are finished and the bottom brace is all tacked up.

Image

Image

Image

Image

time for the back panel!!
TD5 96 Discovery UTE.
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

Roof was tested this arvo and it went back on so it's the rear roof brace and the backing plate and it back to the engineer!



Image


Image

Mick
TD5 96 Discovery UTE.
Top
Posts: 1119
Joined: Mon Dec 16, 2002 4:24 pm
Location: Neither here nor there

Post by TuffRR »

Top sh1t, looking good. :cool:

Told you it would be ready by cup weekend. ;)
Range Rover - 4.4 V8, MD Crawler Box, F&R Lockers, 35" Centipedes, 4" lift. Overqualified WebWheeler!!!

Discovery - Bling touring stuff!
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

TuffRR wrote:Top sh1t, looking good. :cool:

Told you it would be ready by cup weekend. ;)
take a day off next week and tow it and me to the engineers!
TD5 96 Discovery UTE.
Top
Posts: 1057
Joined: Mon Feb 10, 2003 12:28 pm
Location: Eastern Sector

Post by mickrangie »

Day 10 errr

Damage report -

3 x 4 foot fluros (with my head)
chunk of skin from finger with grinder. (you should see the glove)

and i lost count how many welds i grabbed just after i did them :o :o

Image

Yay it all fits!!


Image

Bit early but it should be pretty easy

Mick
TD5 96 Discovery UTE.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 25 guests