Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rolled 94 S cab hilux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Hey any news on whats going on/ New lux
plenty of parts on the bench
Top
Posts: 255
Joined: Thu Mar 15, 2007 8:24 pm
Location: PENRIFF

snorkel

Post by SHANE055 »

southside 4x4 wreakers at archerfield had a snorkel on a 2.8d lux when i was there last week and thats where i got the one for my lux from think i paid bout 200 or 250 cheaper than a newie anyways
Coil SASed 03 LUX 3.0TD
91 TD 80 series wagon
Top
Posts: 3201
Joined: Wed Oct 25, 2006 9:17 am
Location: Brisbane

Post by Lux_89 »

Oh beauty. Cheers foe lookin out shaneo. Muchly appreciate it m8. Will pay them a vist. Just got to go out and get the right size hole saw n im in buisness ! :D
Single cab 106r - BBP Turbo 3rz
*Boondal Backyard Performance*
Top
Posts: 255
Joined: Thu Mar 15, 2007 8:24 pm
Location: PENRIFF

holes

Post by SHANE055 »

cut mine with a metalblade in a jigsaw heaps cheaper than a holesaw if you have or can get a jigsaw
Coil SASed 03 LUX 3.0TD
91 TD 80 series wagon
Top
Posts: 343
Joined: Fri Mar 19, 2004 8:19 pm
Location: Lalalty NSW (or is that VIC?)

Re: holes

Post by HIL01X »

SHANE055 wrote:cut mine with a metalblade in a jigsaw heaps cheaper than a holesaw if you have or can get a jigsaw
Done the same. Just cover the guard and bottom of the jigsaw with some masking tape. It doesn't hurt to have a practice run on an old panel either ;)
Allways been a TOYOTA man.
Now I'm old and grumpy as well.
Top
Posts: 3201
Joined: Wed Oct 25, 2006 9:17 am
Location: Brisbane

Post by Lux_89 »

Alrighty. Cheers guys big help ey. Yeh im a chippy so ill get a hold of my bosses i think. just by the blade and done. Sicklux, the ute hasnt changed yet. I am starting sunday to rip into my old one with the suspension. Hav the exhaust sitting and ready to transplant to the new 1. The bodylift is all good too. ill get some pics tomorrow in my travells around the yard. Um ill prolly be goin easter trip. Just that ill be in a low lux :D unfortunetly :bad-words: Cheers guys oh n did you guys hear about the thread how that tasmanian bloke is wanting to kill his 3F.. ppl are telling him to give it to v8 pootrols old man and they wont . What a waste of machinery. Fuggin clouns. :x
Single cab 106r - BBP Turbo 3rz
*Boondal Backyard Performance*
Top
Posts: 3201
Joined: Wed Oct 25, 2006 9:17 am
Location: Brisbane

Post by Lux_89 »

Alrighty.. so i stripped the back halph today. Got the tray off, and sold it in its mangled state for 300. Got the fuel tank out, and most of the electricals sorted.
Image

So thats the start. All the light gear and stuff off the bullbar and the uhf, or whats left of it :bad-words: So i then went about getting the rear packs removed, after havinga hard time getting the fixed pins out, so belted them for a while n they came out. There pitted as so i wos wondering if anyone knows wether superior sells them in a greasable type?? So anyways this is where im up to.
Image

suspension all done and half the zost off. Cut it in half cut i only need the muff and extract. upgrading to 2.5 pipe

Image

Cheers Chris
Single cab 106r - BBP Turbo 3rz
*Boondal Backyard Performance*
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest