Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

using original switches

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 59
Joined: Sat Nov 11, 2006 9:17 am
Location: Melbourne, Victoria

Contact:
Contact dassaw

using original switches

Post by dassaw »

Has anyone used the original switches in their disco's to run their lockers or compressor, trying to utilise the fog lamp swith in my disco and make it the switch for the compressor for the lockers, but doesnt seem to be as straight forward as i thought.

Any ideas?

Cheers.
Top
Posts: 57
Joined: Tue Apr 13, 2004 8:21 pm
Location: North Brissy

Post by subaman »

I changed the fog switch over to run my spotties so should not be to hard to do the same for compressor etc, just use the wires out to the fog lights and connect them to your accessories. ;)
gas grass or arse no one rides for free
Top
Posts: 1570
Joined: Mon Aug 02, 2004 9:38 am
Location: Dalby

Contact:
Contact Utemad

Post by Utemad »

A guy in our club has used a factory switch for his compressor. It's possible anyway as it is just a switch. You just need to figure out which terminals are connected when you push the button.
Land Rover Discovery series 1 V8
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest