Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hilux Front Driveshaft

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 5
Joined: Wed Sep 01, 2004 10:09 am
Location: Coffs Harbour, NSW

Hilux Front Driveshaft

Post by Simo »

Hey Guys,

Anyone got any idea how much it should cost me to get a long travel slip yolk put into my front driveshaft? Any places around Sydney that I can get it done?

I got a quote from a place in Arndell Park, they reckon about $580.

I've put rear springs into the front of an 85 4runner but need to fix up my driveshaft, Thought the quote I got sounds steep but have no idea really.
85 4Runner, slowest car ever invented
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Yeh thats about right. I got I thats got about 260mm slip.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 1477
Joined: Tue Mar 07, 2006 1:13 am
Location: The Gong

Contact:
Contact jimbo jones

Post by jimbo jones »

why dont you fit a tail shaft spacer?
jimbo
current truck, 105 series GXL diesel 6" springs & twin pro lockers
sierra LWB spoa one wide track diffs twin locked

Sierra Parts Wanted pm me
Top
Posts: 5
Joined: Wed Sep 01, 2004 10:09 am
Location: Coffs Harbour, NSW

Post by Simo »

It needs about another 70mm or so, figued thats prob too much for a spacer.
85 4Runner, slowest car ever invented
Top
Posts: 97
Joined: Sun Sep 10, 2006 9:15 am
Location: CENTRAL COAST

Contact:
Contact rusty_burrows

tail shaft slip yoke

Post by rusty_burrows »

mate i used the rear tailshaft out of a dual cab (the 2 piece shaft) and re drilled the flange on the transfer case and cut some of the slip yoke about 11/2" off the ends of the slip yoke and that has done the trick and i also put the rear springs out of a 4 runner and i dont have any troubles even at full travel and i also modified the springs to give me more travel
russell
Top
Posts: 293
Joined: Sat Jan 21, 2006 1:49 pm
Location: Central Coast

Post by mud guts »

Have done the same mod. Go a square one, its good till 65km
Top
Posts: 5
Joined: Wed Sep 01, 2004 10:09 am
Location: Coffs Harbour, NSW

Post by Simo »

Is a square one any better? How much will it cost to get one made up? Know where I can get one made up?
85 4Runner, slowest car ever invented
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

Simo wrote:Is a square one any better? How much will it cost to get one made up? Know where I can get one made up?
Make it yourself, Its only for slow speed work, but will allow for lots of slip. Basically its 2 bits of SHS that slip one inside the other. Search there is a bit of info on them, and a few how toos.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests