Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GQ Air box problem 4.2L efi Petrol/gas
GQ Air box problem 4.2L efi Petrol/gas
GQ 4.2L Petrol EFI engine on gas.
I am having a bit of a problem in that the airbox on the GQ is buggered. It needs a new one top and bottom, and we cannot track down a second-hand one for love nor money. I'm not paying $580 for a genuine one neither.
I have been told that possibly a VL commodore one may fit, but a Nissan Pulsar N13 or Skyline one might even be better. Has anyone else come across and fixed this problem? Any ideas would be greatly appreciated as the zippi-ties aren't gonna last forever.......
I am having a bit of a problem in that the airbox on the GQ is buggered. It needs a new one top and bottom, and we cannot track down a second-hand one for love nor money. I'm not paying $580 for a genuine one neither.
I have been told that possibly a VL commodore one may fit, but a Nissan Pulsar N13 or Skyline one might even be better. Has anyone else come across and fixed this problem? Any ideas would be greatly appreciated as the zippi-ties aren't gonna last forever.......
Re: GQ Air box problem 4.2L efi Petrol/gas
How about a GU airbox, doesn't matter which model, and just fit some 3" tube between it and the gas mixer. They bolt straight in behind the LH headlight and the last one cost me $165.sim wrote:GQ 4.2L Petrol EFI engine on gas.
I am having a bit of a problem in that the airbox on the GQ is buggered. It needs a new one top and bottom, and we cannot track down a second-hand one for love nor money. I'm not paying $580 for a genuine one neither.
I have been told that possibly a VL commodore one may fit, but a Nissan Pulsar N13 or Skyline one might even be better. Has anyone else come across and fixed this problem? Any ideas would be greatly appreciated as the zippi-ties aren't gonna last forever.......
Dave
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
I don't know if they flow more that the EFI box, but the inlet is 3.5" and the outlet is 3". We just cut off the flange and mounted the intake hose straight over the remaining pipe.CRUSHU wrote:Do you know if they flow more than the standard EFI box? is the pip diameter bigger or the same?
Looks like a good idea to me.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Who is online
Users browsing this forum: No registered users and 3 guests