Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4'' lift gq lwb how much longer panhrads

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 4
Joined: Fri Sep 01, 2006 1:31 pm
Location: box hill south

4'' lift gq lwb how much longer panhrads

Post by gqlwb »

Hi i just fitted a 4'' lift and was wondering how much longer to make front and rear panhards?
Top
Posts: 191
Joined: Thu Dec 07, 2006 8:56 pm
Location: Sunny Coast

Post by killer_garden_gnome »

undo one end of the rods, push the body across to where u want it and measure to the center of ur bolt on points
Top
Posts: 4
Joined: Fri Sep 01, 2006 1:31 pm
Location: box hill south

Post by gqlwb »

how do you know if it is in the right place?
what do you measure? side to side
or do you go by eye?
Top
Posts: 191
Joined: Thu Dec 07, 2006 8:56 pm
Location: Sunny Coast

Post by killer_garden_gnome »

by eye or get a straight edge up the sde of ur tyres and measure into a common point on either side of the car that way u can find where ur body is sitting in relation to your wheels and this will leave ur diffs ending up where they should be. then measure from the chassis mount to ur diff mount to get ur new rod length
Top
Posts: 1419
Joined: Mon Apr 24, 2006 7:31 pm
Location: South Bris

panhard

Post by micks troll »

Gday gqlwb I have 4" and the panhard length to centre of each bolt is 985 rear and 875 front roughly measured within a couple a mm hope this helps mine are adjustable and a workshop fitted so i assume this sould be correct length. correct me if i'm wrong anyone :)
White 92 GQ TD42 LWB (AKA Putt putt)
licorice all sorts added
Top
Posts: 273
Joined: Fri Jul 30, 2004 6:39 pm
Location: cranbourne

Re: panhard

Post by embryo »

micks troll wrote:Gday gqlwb I have 4" and the panhard length to centre of each bolt is 985 rear and 875 front roughly measured within a couple a mm hope this helps mine are adjustable and a workshop fitted so i assume this sould be correct length. correct me if i'm wrong anyone :)
yeah its a car buy car thing. find a common point and mesure from there.

the aim is to get the wheels central uner the car as i assume you've noticed one side hanging out! :lol:
dont tell the missus
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests