My CT20 is pretty crook, and they are rareish and seem to be kinda expensive when you can find one.
What are the alternatives ? T28 (what A/R) Is a T3 to big if it has a lowish say sub 60 A/R ? ..
$$ are important and I will happily run another CT20 if I can get a decent one cheap enough (say $500 or less .. 8 psi boost is enough for me ... I just need to get a Ute back on the road ... a camry and a Zuk are not much good for taking big lots of messy stuff to the tip, or getting loads of firewood)
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
2L and alternate turbo's
Moderators: toaddog, Elmo, DUDELUX
2L and alternate turbo's
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Mine will need a new exhaust side housing as the cracks from the wastegate are pretty big, I have been told it is marginal to rebuild.
There is a place in NZ that will do brand new ct20's for $650NZ plus about $80NZ for shipping. (Which is what I think I will do)
There is a place in NZ that will do brand new ct20's for $650NZ plus about $80NZ for shipping. (Which is what I think I will do)
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Been looking and PMing (surf site) about the one's that are there, but no-one seems to return messages on that board .. I am bidding on one on Ebay as well.tweak'e wrote:really ?My CT20 is pretty crook, and they are rareish
they are usually comman as mud. if you really get stuck i think there are a few NZ wreakers who can send some over.
i'm sure there must be a heap you could buy from on the surf site.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
don't PM (private message) as you will get flagged as spam. there is plenty of surf friendly wreakers posted, i would be suprissed if they didn't have one. i'm sure someone must have a dud one you can get a housing off.love_mud wrote:
Been looking and PMing (surf site) about the one's that are there, but no-one seems to return messages on that board .. I am bidding on one on Ebay as well.
Thanks guys .. will be on the phone in the morning (i just want another turbo, will rebuild this one at some stage if I can get a housing .. but at the moment all my money is going on finishing my laundry.. baby is very very imminent)
That said surely there are better turbo's for 2l's than the CT20 .. anything with a roller bearing core perhaps ???
That said surely there are better turbo's for 2l's than the CT20 .. anything with a roller bearing core perhaps ???
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
plenty of better turbo's, just getting them to fit is the problem. custom manifolds etc are not cheap. afaik it would be cheaper just to hiflow a ct20. i havn't heard of a direct bolt on replacement.love_mud wrote:Thanks guys .. will be on the phone in the morning (i just want another turbo, will rebuild this one at some stage if I can get a housing .. but at the moment all my money is going on finishing my laundry.. baby is very very imminent)
That said surely there are better turbo's for 2l's than the CT20 .. anything with a roller bearing core perhaps ???
if you can get a 2lt-e ct20 turbo (water cooled i think).
I have a cad drwaing to create an adapter plate from to suit the yota log style exhaust manifold to a garret T3 turbo flange ... been quoted about $100 to build, even a steam pipe manifold could not really cost that much (having never priced one ... I am sure I will be shcoked at the actual price)
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
what did it end up costing ? and what was replaced..
Once I get a few $$ together I may look at getting my old one done and swap it over and sell the second hand. (if the payoff in HP/reliability is worth it of course)
Once I get a few $$ together I may look at getting my old one done and swap it over and sell the second hand. (if the payoff in HP/reliability is worth it of course)
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Thats not to bad, as the best I have been quoted for just the seals is is about $375 (from a place in NZ) ..YB.LOW4 wrote:ended up costing $850 that was hi flow the housing a change to a different compressor wheel. also, all seals were replaced and gaskets etc.
So basically you have what amounts to a new turbo.. If my ebay sale falls through I will look into it ... can you PM me the contact details of where you got it done ...
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Thankshylux wrote:I was in Gold Coast 4wd wreakers to day, they had 2 x 2.8 turbo kit on the board ..... can't remember the price though....might be worth a call....
Ph. 07 55915988.
Pete
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Who is online
Users browsing this forum: No registered users and 117 guests