What is the best oil to run in a R380 ?
Thanx in advance
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
which oil ?
Moderator: Micka
ATF works well, and is recommended by the factory, but I'm running syntrans in my series 2 disco R380 (which is also suggested by the factory)... No particular reason for running syntrans, except for a hope that it'll provide smoother shifts warm (bit crappy cold though!), and promote longer life than the ATF.
84 Rangie, 3 inch spring lift, 2 inch body, Megasquirted 4.6, R380, rear Maxi, 34x11.5 JT2s. Simex FM installed.
[quote="RangingRover"]ATF works well, and is recommended by the factory, but I'm running syntrans in my series 2 disco R380 (which is also suggested by the factory)... No particular reason for running syntrans, except for a hope that it'll provide smoother shifts warm (bit crappy cold though!), and promote longer life than the ATF.[/quote]
ATF ceased to be recommended by the factory in about 98 when they found gearboxes were being worn out - MTF94 is now factory recommended.
SynTrans provides a good compromise between cold morning starts and hot running.
ATF ceased to be recommended by the factory in about 98 when they found gearboxes were being worn out - MTF94 is now factory recommended.
SynTrans provides a good compromise between cold morning starts and hot running.
Garry
Who is online
Users browsing this forum: No registered users and 35 guests