Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Has anyone got any pics of their 80 with castor plates?
Checked the fitting instructions and it talks about grinding the bottom of the diff bracket off to get the top hole to align.......I assume that they are referring to the holes above the Original bolt position!
Just need some friendly advice before I get the grinder out
Fitted a 3-4" inch lift on the 80 drove a few weeks and had the alignment checked, reading was -2deg, so I put some 5deg castor plates on yesterday.
Truck has a partime conversion and now drives very well in 2wd, no wander, but when I lock in to 4wd and drive THEN lift off I get a very bad vibration/noise.......no noise or vibration under load tho
