looking at doing a coil conversion on the rear of my 60 series just wanted to know if anybody has done one and if anybody has photos of setups
thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
anybody out there done a coil conversion on a 60 series
Moderators: toaddog, Elmo, DUDELUX
There was 1 forsale up here in Newy in a small caryard never stopped to have a gander but a few friends did but I cant remember there comment ......
there's a fella on outers that transplanted the 60 shell onto a GQ chassis from memory does that count
What kind of link setup you looking/wanting to use ......putting a 80 series complete housing and 5 link set up may be an option cut all the 80 factpry mounts off and re-fit the 60
But a well setup 4 link or A frame would be better in long term in my mind ....
there's a fella on outers that transplanted the 60 shell onto a GQ chassis from memory does that count
What kind of link setup you looking/wanting to use ......putting a 80 series complete housing and 5 link set up may be an option cut all the 80 factpry mounts off and re-fit the 60
But a well setup 4 link or A frame would be better in long term in my mind ....
[b][i] DAN [/i] [/b]
:silly:
:silly:
Dan,
we are currently talkin over ideas as we will be doing a cab swap on his 60, that way all chassis mods can be done while the body is off, we have been talkin about an aframe setup, and also the factory 5 link from an 80 series,
he has a spare diff housing and chassis that we will be doing all the mockup on,
im leading towards an Aframe, but final decision is up to him, may even 4 link it yet, he was just lookin to see if others have done it, and their thoughts on their setups,
we are currently talkin over ideas as we will be doing a cab swap on his 60, that way all chassis mods can be done while the body is off, we have been talkin about an aframe setup, and also the factory 5 link from an 80 series,
he has a spare diff housing and chassis that we will be doing all the mockup on,
im leading towards an Aframe, but final decision is up to him, may even 4 link it yet, he was just lookin to see if others have done it, and their thoughts on their setups,
Who is online
Users browsing this forum: No registered users and 1 guest