Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Hilux shackles on a Mk

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 1836
Joined: Wed Aug 11, 2004 10:41 am
Location: Brisbane

Hilux shackles on a Mk

Post by badger »

been told that front hilux shackle fits rear of mk and rear lux fits front of mk
is this true?
as we are chasing some cheap extended shackles for the mk and lux ones are easier to find
1hd-fte 5 speed tiptronic 105 series
78 series troopy for work
gu ute play truck For sale
FTE 80 series sahara Sold

i think i have a problem
Posts: 297
Joined: Wed Jul 12, 2006 6:32 pm
Location: cranbourne, vic

Post by g60boy »

rear hilux shackles are 2mm skinyer than mk front springs (wide spring) (thats measuring the lower half of the mk front shackle and rear hilux shacle inside to inside) i was looking at this to day, i was thinking of using hilux rear, back shackle mounts insted of the bronze bush for a full rubber or urathane front end.

but i dont know about using front hilux for rear, ill measure them up later as you have given me some bad idea's :twisted: ;)
mq shorty, black, rust free!!, quarter chop, F&R tube bars and sliders, q78's or 33'' stt's, 4.88's with lsd waiting to be thrown in.. :D http://www.patrol4x4.com/forum/showthread.php?t=9540
Posts: 297
Joined: Wed Jul 12, 2006 6:32 pm
Location: cranbourne, vic

Post by g60boy »

rears will also, but you may need some washers at the top, as the top of the hilux shackles are wider and the standed rear hilux shackles are shorter than mk rears. im not sure if the pins are correct size.
mq shorty, black, rust free!!, quarter chop, F&R tube bars and sliders, q78's or 33'' stt's, 4.88's with lsd waiting to be thrown in.. :D http://www.patrol4x4.com/forum/showthread.php?t=9540
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest