Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

anybody out there done a coil conversion on a 60 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 16
Joined: Tue Aug 23, 2005 1:35 pm
Location: sydney

anybody out there done a coil conversion on a 60 series

Post by mr304 »

looking at doing a coil conversion on the rear of my 60 series just wanted to know if anybody has done one and if anybody has photos of setups

thanks
Posts: 16
Joined: Tue Aug 23, 2005 1:35 pm
Location: sydney

Post by mr304 »

hello anybody please help need ideas
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Have you tried the search and maybe a good look through the mebers section
plenty of parts on the bench
User avatar
A1
Posts: 3451
Joined: Tue Jan 28, 2003 8:57 pm
Location: NEWCASTLE

Post by A1 »

There was 1 forsale up here in Newy in a small caryard never stopped to have a gander but a few friends did but I cant remember there comment ......


there's a fella on outers that transplanted the 60 shell onto a GQ chassis from memory does that count ;)


What kind of link setup you looking/wanting to use ......putting a 80 series complete housing and 5 link set up may be an option cut all the 80 factpry mounts off and re-fit the 60

But a well setup 4 link or A frame would be better in long term in my mind ....
[b][i] DAN [/i] [/b]


:silly:
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

Dan,

we are currently talkin over ideas as we will be doing a cab swap on his 60, that way all chassis mods can be done while the body is off, we have been talkin about an aframe setup, and also the factory 5 link from an 80 series,

he has a spare diff housing and chassis that we will be doing all the mockup on,

im leading towards an Aframe, but final decision is up to him, may even 4 link it yet, he was just lookin to see if others have done it, and their thoughts on their setups,
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests